lifeeconomic 
Best results for wood river drill guide
Kreg MKJKIT Mini Kreg Jig Kit
Amazon.com
Last update was on: April 26, 2024 9:55 am
- Makes pocket hole joinery work easier
- No-fence design makes for easy positioning
- One-hole jig is great for furniture repairs or flooring work
- Includes 3/8-inch step drill bit, depth collar, and Allen wrench
- Handy for repair applications and space constricted areas
WEN 4208 8 in. 5-Speed Drill Press
$81.18
$103.91
Amazon.com
Last update was on: April 26, 2024 9:55 am
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
Big Gator Tools STD1000DGNP V-Drill Guide
$24.95
$29.69
Amazon.com
Last update was on: April 26, 2024 9:55 am
- 17 drill sizes, from 1/8" to 3/8", in 1/64" increments
- Use on flat surfaces, round parts, and corners
- Special nickel alloyed steel heat treated for durability
- Non-plated material with light oil coating to prevent rust
- Alignment marks on guide to line up on center
General Tools 850 Heavy Duty, All-In-One Aluminum Pocket Hole Jig Kit, 76 Piece Set With Carrying Case
$27.16
$38.30
Amazon.com
Last update was on: April 26, 2024 9:55 am
- COMPLETE POCKET HOLE JIG SYSTEM - Jig kit includes: pocket hole jig with clamp, #32 3/8 In. Step Drill Bit (replaceable), 3/8 in. steel stop collar, Hex wrench 6 in. square drive bit, 24 coarse square drive screws, 24 fine square drive screws, 24 wooden pocket hole plugs, Hard plastic carrying case.
- ACCURATE- this jig creates flush, corner and angle pocket hole joints for leg-and-rail connections, building face frame cabinets, sneaking screws into tight spots, and fastening picture frames with unlimited applications
Milescraft 1321 PocketJig100 Kit
$13.49
$15.92
Amazon.com
Last update was on: April 26, 2024 9:55 am
- There are 4 common board thickness settings built into the jig (1/2", 3/4", 1" and 1-1/2") with easy reference marks to mark your board thickness and set your jig
- Includes a clamping magnet to allow you to easily secure the jig to your work piece using any standard metal clamp
- for speed and accuracy, use the Milescraft 3" FaceClamp
- No fence and small design allow you to get into some of the smallest places to make repairs to many joints
Big Gator Tools SDGMINI MINI V-Drill Guide 21 Drill Sizes
$24.95
$34.68
Amazon.com
Last update was on: April 26, 2024 9:55 am
- 21 Drill Sizes: #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64".
- Covers all tap drill sizes for tap sizes: 10-32 down to 0-80.
- The portable V-Drill Guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round parts!
- Heat treated for durability. Side alignment marks allow accurate hole locating.
- 100% Made in U.S.A.
Milescraft 5342 Drill Stop Set, 6-Piece
R3-Promo Kreg R3 Jig Pocket Hole Kit With Free Classic Clamp Pack-In
Milescraft 1309 DowelJigKit – Complete Doweling Kit with Dowel Pins and Bits
$18.99
$24.50
Amazon.com
Last update was on: April 26, 2024 9:55 am
- The Miles craft Joint Mate allows for quick and accurately doweled corner, edge or surface joints
- Metal bushings included to ensure accurate alignment When drilling for perfectly positioned dowels every time
- Steel dowel/Tenon centers for durable and accurate location marking of dowel holes or in second board being joined
- Fluted hardwood dowel pins with chamfered ends Add strength and endurance to your joined surfaces (Includes 3 different sizes)
Kreg Tool Company KHI-PULL Cabinet Hardware Jig
$24.00
$35.52
Amazon.com
Last update was on: April 26, 2024 9:55 am
- Install Knobs and Pulls the Worry-Free Way – with Easy, Repeatable Accuracy
- Adjustable guides for accurate hole placement
- Built-in measuring scales for repeatable results
- Versatile for mounting single and multi-hole knobs
- Adjustable edge guide for easy positioning
Milescraft 13230003 PocketJig200 Kit – Complete Pocket Hole Kit with Jig, Bit, Screws and Drivers, Black/Red
$25.00
$33.00
Amazon.com
Last update was on: April 26, 2024 9:55 am
- Built in imperial and metric scales allow you to easily measure the thickness of your work piece
- There are 4 common board thickness settings built into the jig (1/2", 3/4", 1" and 1-1/2") with an easy read out arrow to help define your board thickness setting and easily adjust it
- Includes a clamping magnet to allow you to easily secure the jig to your work piece using any standard metal clamp
- for speed and accuracy, use the Miles craft 3" Face Clamp
Milescraft 1312 DrillBlock- Handheld Drill Guide
$7.08
$9.06
Amazon.com
Last update was on: April 26, 2024 9:55 am
- Centerlines ensure accurate alignment when drilling into various surfaces
- Non-slip feet holds the DrillBlock in place while preventing both slipping and marring on wooden work pieces
- The two product v-grooves allow for usage on corners and even cylindrical surfaces too
Drill Guide Dowel Kit Jig with 6 Bushings 3/16”, 1/4”, 5/16”, 3/8”, 7/16" and 1/2”
Can-Do Clamp
Milescraft 1319 JointMate – Handheld Dowel Jig
$10.99
$13.96
Amazon.com
Last update was on: April 26, 2024 9:55 am
- Allows for quick and accurately doweled corner, edge or surface joints
- The self-centering jig and adjustable fence allow for precise dowel alignment for maximum joint strength
- Metal bushings ensure accurate alignment when drilling for perfectly positioned dowels
- Minimal set-up with no exposed or covered mechanical fasteners
- Works with 1/2" to 1-1/2" thick lumber
NoCry Pocket Hole Jig System – 2-in-1 Jig and Dowel Tool Kit with 78 Accessories, Including F-Clamp, Drill Bits, Screws, Dowel Plugs & Carrying Case
$39.99
$55.99
Amazon.com
Last update was on: April 26, 2024 9:55 am
- This 2-in-1 jig kit will consistently create precise pocket and doweling holes for super-strong, professional-looking wood joints. A quality USD 45 set (that would normally cost around USD 100 to collect) with all the necessary accessories included to get your next project up and running right away.
- Besides the jig itself, you'll also get 1 jig drill bit (3/8 inch), 4 doweling drill bits (1/4, 5/16, 3/8, 1/2in), & 4 matching stop collars, 1 square head screwdriver bit, 1 dowel drill hole guide wheel & support handle, 2 hex keys (3/32in & 1/8in), jig & dowel stop blocks, 20 self-tapping wood screws, 10 concealing plugs, 30 dowel pins, a 12in F-clamp (larger than most competitor included clamps) with canvas storage bag & a protective organizer case.
Yakamoz 2Pcs 1/4-Inch Hex Shank Center Drill Bit Set Door Window Cabinet Self Centering Hinge Tapper Core Hole Openning Puncher Bits Woodworking Tools 5mm 1/4”
$12.99
$18.71
Amazon.com
Last update was on: April 26, 2024 9:55 am
- Outstanding design: Unique design with perfect punch effect. Sawdust will be automatically discharged from the top of the holes on both sides, without drill blocked.
- Easy to replace and install: According to the hardness of the wood, you can choose different centering drill, take the screw apart and you can replace the drill easily. At the same time, change bits fast which one-handed load and release.
IRWIN Tools SPEEDBOR Blue Groove Pro Spade Bit Set with Case, 8-Piece (341008)
IRWIN Tools SPEEDBOR Max Speed Wood Drill Bit Set, 3-Piece (3041003)
$11.40
$16.64
Amazon.com
Last update was on: April 26, 2024 9:55 am
- Fits all standard 1/4-Inch quick change chucks
- Wood drill bit set features bits with a tri-flute design for faster chip ejection
- Cutting spurs have 3 cutting edges for added durability
- Full screw tip allows bit to self feed
- Grooved hex shank prevents slipping in drill chuck or bit extension
Zipbolt 40.260 Railbolt Drill Guide Woodworking Project Kit
$32.99
$48.83
Amazon.com
Last update was on: April 26, 2024 9:55 am
- The Zipbolt 40.260 Railbolt Drill Guide is the must have installation accessory for installing Zipbolt staircase hardware products
- Simplifies the process of installing your Zipbolt staircase hardware
- Compatible with Zipbolt 11.550, 11.560, 13.600, 13.610, 13.801, 13.810, 13.900, 13.950, and 13.960
- Includes all necessary drill bits and instructions on the back of the package - Protective pouch keeps everything together
