lifeeconomic 
Best results for thickness planer spiral cutterhead
Cutech 40200H-CT 13" Spiral Cutterhead Planer – Professional Model
Cutech 40600H-CT 13" Spiral Cutterhead Planer – Deluxe Model Plus
Byrd Tool Shelix cutterhead for Dewalt planer DW735
$388.58
$458.52
Amazon.com
Last update was on: November 23, 2024 3:41 am
- Cutterhead diameter is 0.088" (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts.
- C3 carbide cutters lasts an average of 10 times longer per side (4 sides = 40x) than traditional steel knives.
- Spiraled to break up chips for dust collection, shear to give clean cutting action
- True helical cut (slices the wood) which greatly reduces noise and tearout
OSCARBIDE 15mm Square Carbide Inserts Cutters (15 x15 x2.5-R150) Replacement Insert Cutter 6”Radius Face for Woodworking Spiral/Helical Planer Cutter Head Wood Turning Tool 10pcs
$25.99
$30.15
Amazon.com
Last update was on: November 23, 2024 3:41 am
- Carbide Cutter size: 15mmx15mmx2.5mm,4-indexable cutting edge,30* Cutting bevel, With 150mm Radius and 4 Radius Corners,polished to a mirror finish for smoother cutting and longer tool life
- Made of Tungstern Carbide, more endurable ,for long time using.
- This replacement carbide inserts are specifically designed to fit Titan Spiral Shear Heads for surfacing/planing cutterhead,groovers,helical head etc
YUFUTOL 4 Inches Face Radius Carbide Cutter Insert For Wood Working(15mm length X15mm width X2.5mm thickness) Fits Byrd Journal(Helical) Heads,Pack of 10, Wood working Replacement inserts
$25.99
$32.49
Amazon.com
Last update was on: November 23, 2024 3:41 am
- K05 solid carbide cutter inserts providing you a better experience and durable use to general purpose wood, chipboard, plywood, MDF/HDF.
- Excellent replacement carbide insert cutter specially Fits Byrd Journal Helical head,pack of 10
- Four usable sides(15mmX15mm), with 4" Face Radius R100mm, Radius Corner,and all are of the same sharpness
- If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
Shelix Carbide Inserts – Box of 10 – Fits Byrd Cutterheads – 15mm x 15mm x 2.5mm
Cutech 40700HC-CT 12 1/2" Spiral Cutterhead Planer with Carbide Tips
Cutech 40700H-CT 12 1/2" Spiral Cutterhead Planer with High Speed Steel Tips
Cutech 40200HC-CT 13" Spiral Cutterhead Planer W/Carbide Inserts – Professional Model
14mm Carbide Inserts Cutters Knives Replacement Square Straight 14mm x 14 x 2mm with Screws for Grizzly T21348 and Woodworking Spiral Helical Planer Head 10pcs
$24.73
$31.16
Amazon.com
Last update was on: November 23, 2024 3:41 am
- Standard Size-14mm(length)X14mm(width)X2.0mm(thickness) square straight with 4 edges,30 degree cutting angle
- Most Convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
- 10 pieces per box,packed with a plastic container for safe and easy storage
- Easy to operate,each blade has 4 sharp edges,if one is dull, just change it to the other side
Cutech 40700-CT 12 1/2" Straight Knife Planer – Budget Model …
OSCARBIDE 13 Inch Planer Blades for DW735 Planer DW7352 HSS Replacement Knives 2 Cutting Honed Edges 13” x 7/8” x1/16”,3 pcs/box
$39.89
$55.45
Amazon.com
Last update was on: November 23, 2024 3:41 am
- Size: 13"(333mm) x 7/8"(22.3mm) x 1/16"(1.6mm)
- Replacement :Replacement Knives for DW735 Planers
- High Quality:OSCARBIDE planer knives are made of High Speed Steel（HSS),Sharpness，abrasion resistance , corrosion resistant, no deformation
- Ingenious blade design: the knife is designed with two cutting edges. They are double sided .It’s sharp and reversible for a long time using
- Economical: 3pcs blades in a plastic box
YUFUTOL 15mm(.59") Square Carbide Insert Cutter(15mm lengthX15mm widthX2.5mm thickness), Designed for DIY Wood Lathe Tools Wood Turning Tools,1 pcs
$9.71
$13.40
Amazon.com
Last update was on: November 23, 2024 3:41 am
- Made of solid tungsten carbide, providing you a better experience and durable use
- Designed for popular woodturning and other hand tools and power tools
- Easy to replace your jointers and planers or wood turning tools, excellent accessory for wood turning work.
- Four usable sides(15mm lengthX15mm width X2.5mm Thick-30* Cutting angle, and all are of the same sharpness
- If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
YUFUTOL 5/8 Inch(16mm) Diameter Round Carbide Replacement Insert Cutter With 30 degree Cutting Angle, Pack of 10, For Full And Pro Size Finisher Wood Turning Lathe Tools
$49.99
$71.99
Amazon.com
Last update was on: November 23, 2024 3:41 am
- The perfect grade of carbide provides the best combination of the sharpness and durability
- Excellent for Hollowing bowls, Designed for all small &mid size hollowers Easy Finishers
- Mounts with Flat head screws M5x8mm, Leaves smooth finishing after cut.
- Per pack of 10 pcs round carbide insert cutters, Size DIA 16mm X THICK3.0mm-R30*
- Designed with a 30° cutting angle ground to a razor finish for making smooth cuts in any hard wood
YUFUTOL Carbide Insert for Wood Turning | Sharp Point Diamond Shape Detailer Carbide Cutter 13.52mm(.53”) X13.52mm(0.53”),2.5mm(.10”) Thickness,Supplied with M6X8mm Screw,Pack of 1
$9.00
$11.52
Amazon.com
Last update was on: November 23, 2024 3:41 am
- Diamond shape tungsten carbide insert:13.52mm(.53”)X13.52mm(0.53”),2.5mm(.10”) Thickness
- Made of solid tungsten carbide KT30U, providing you a better experience of the sharpness and durability use
- The mounting hole in the insert is approx(6mm) dia. with standard countersink
- With a 30 degree cutting angle these insert can remove a large amount of material very quickly
- Optimal grinding process produces the flattest and smoothest cutting surface
YUFUTOL Sharp Point Diamond shape Detailer Carbide Cutter Insert 10mm(.394”) X28mm(1.10”),2.5mm(.10”) Thickness, Pack of 1,Supplied With M4X8mm Screw For Wood Turning
$11.34
$14.06
Amazon.com
Last update was on: November 23, 2024 3:41 am
- Size : diamond shape: 10mm (.394") X 28mm(1.10") , thickness 2.5mm (.10")
- Made of solid tungsten carbide KT30U, providing you a better experience and durable use
- The mounting hole in the insert is (4.15mm) dia. with standard countersink
- With a 30 degree cutting angle these insert can remove a large amount of material very quickly
- Optimal grinding process produces the flattest and smoothest cutting surface
YUFUTOL 4" Radius Face R-100mm Wood Turning Carbide Replacement Cutter Insert(15mm length X15mm width X2.5mm thickness) -corner radius,Pack of 10,Fits wood Turning lathe Tools
$27.99
$30.79
Amazon.com
Last update was on: November 23, 2024 3:41 am
- K05 solid carbide cutter inserts providing you a better experience and durable use to general purpose wood, chipboard, plywood, MDF/HDF.
- Excellent accessory for wood turning, Not Fits BYRD,mounted with flat crew M6-8mm
- Four usable sides(15mmX15mm), with radius face -R100mm, radius corners, and all are of the same sharpness
- If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
OSCARBIDE 11mm Square with Corner Radius Carbide Cutters Inserts(11x11x2.0mm-R50-4R0.5) Replacement for Woodworking Fits Spiral/Helical Planer Cutter Head lathe Turning Tools
$25.99
$29.11
Amazon.com
Last update was on: November 23, 2024 3:41 am
- Standard size: 11mmx11mmx2.0mm,4-indexable cutting edge,30 Cutting bevel,50mm radius edge polished to a mirror finish for smoother cutting and longer tool life
- Made of Tungsten Carbide, more endurable, for long time using
- This replacement carbide inserts are designed to fit popular wood working system Cutter Headfor surfacing/planing cutterhead,groovers,helical head
- Each individual cutter insert is sharpened on four sides, radius on 4-side with Radius points,all of the 4 edges can be rotated to expose a new cutting edge when dull or chipped.
YUFUTOL 10.5mm Square Straight Tungsten Carbide Cutter Inserts(10.5mm length X10.5mm widthX2.0mm thickness),Designed for Wood Working Planer Cutter Head,10pcs
$24.99
$31.99
Amazon.com
Last update was on: November 23, 2024 3:41 am
- Standard Size - 10.5 mm square carbide cutter inserts(10.5mm lengthX10.5mm width X2.0mm Thick-35* Cutting angle,No face & corner radius
- High Quality - Made of solid tungsten carbide KT30U, Suitable for processing Hard wood/soft wood,durable and sharp
- Multi Function - Easy to replace your jointers and planers, excellent accessory for wood working or Turning,Polished to a mirror finish for smoother cutting and longer tool life
YUFUTOL 1/2 Inch Diameter 12mm Round Replacement Carbide Cutter Insert, Pack of 10, For Full And Pro Size Hollower Finishers Wood Turning Tools
$46.99
$58.74
Amazon.com
Last update was on: November 23, 2024 3:41 am
- The perfect grade of carbide provides the best combination of the sharpness and durability
- Designed for Easy Start Finishers/Full Pro hollowers,The right geometry or 30*cutting angle is ground to provide an edge the cuts cleanly and safely
- Mounts with Flat head screws M4X8mm, Leaves smooth finishing after cut.
- Per pack of 10 pcs round carbide insert cutters, Size DIA 12mm X THICK2.5mm-30*, saved more compared with buying only 1 PC
