lifeeconomic 
Best results for drill bit too small for chuck
Hymnorq 1/8 Inch Fractional Jobber Twist Drill Bit Set of 10pcs, Heat Resistant M35 Cobalt Steel, Fully Ground and Straight Shank, Suitable for Repeated Drilling in Iron and Stainless Steel
$11.99
$14.39
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- HSS-CO MATERIAL - Manufactured from M35 grade cobalt steel, 5% cobalt added to creates a hardened alloy, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- 135° SPLIT POINT - the 135° quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from "walking and wanding". Easy cutting without need of center punch.
Countersink Drill Bit with Center Punch 8 pack
$11.99
$15.59
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- SIZE: 6mm (1/4 inch), 8mm (5/16 inch), 9mm (3/8 inch), 10mm (2/5 inch), 12mm (1/2 inch), 16mm (5/8 inch), 19mm (3/4 inch). 130mm（5 inch）
- HIGH QUALITY: The flute countersink drill bit set is made from standard high speed steel and super hard titanium coated bits. The automatic center punch is made of pure brass.
- GOOD WORKING: Center hole punch creating a starting point that prevents screws and drills from wandering. Countersink drill holes into wood and soft metals countersunk screws and fixings.
Makita B-65399 Impact Gold 14 Pc. Titanium Drill Bit Set
$14.88
$17.56
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- Drills accurate and clean holes in metal, wood and plastic
- Titanium nitride (tin) coating lasts 2.5x longer than non-coated bits
- 135° split point geometry for faster starts and reduced walking
- Impact rated for use in 1/4" hex impact drivers
- For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel
Countersink Drill Bit Set 7 Pack 1/4” Hex Shank and 90 Degree HSS 5 Flute Drill for Woodworking Drilling
$9.99
$13.19
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- SIZE: 6mm (1/4 inch), 8mm (5/16 inch), 9mm (3/8 inch), 10mm (2/5 inch), 12mm (1/2 inch), 16mm (5/8 inch), 19mm (3/4 inch).
- HIGH QUALITY: The flute countersink drill bit set is made from standard high speed steel and super hard titanium coated bits.
- GOOD WORKING: Great for sinking 90 degree countersink bit holes into wood and soft metals countersunk screws and fixings.
- GREAT DESIGN: 1/4 inch hex shank drill are fine for a quick change. They don’t slip in drill chucks. Delivers an automatic spring driven strike when pressed against surface.
Milwaukee 2494-22 M12 Cordless Combination 3/8" Drill / Driver and 1/4" Hex Impact Driver Dual Power Tool Kit (2 Lithium Ion Batteries, Charger, and Bag Included)
$118.92
$161.73
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- 3/8" DRILL / DRIVER (2407-20): This all-metal drill / driver combines the compact size of a 12 volt tool with Milwaukee’s highest standards for power. With speeds reaching 1,500 RPM and a 20 position clutch to adjust your torque up to 275 inch pounds, you’ll have more than enough power to drive fasteners and drill holes through a variety of residential and industrial projects
- 1/4" HEX IMPACT DRIVER (2462-20): A whopping 2,500 RPM and 1,000 Inch Pounds of torque define this beast of a 12 Volt tool. Handling of it is supported with the textured grip, which gives you improved control in slippery conditions. It also has an onboard LED lighting system for your driving subjects in dimmer areas, and a fuel gauge that lets you know how much work you can still do on a single charge
Forney 60027 Mounted Grinding Point with 1/4-Inch Shank, 1-1/8-Inch-by-3/4-Inch
$5.68
$8.35
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- This are easy to use
- This are highly durable
- This is manufactured in China
- Shank mounted points and grinding wheels are made from durable high grade 60 grit aluminum oxide
- Perfect for grinding, polishing or deburring ferrous metals
- Use with 1/4-Inch chuck for high speed drills
Migiwata Aluminum Alloy Miniature Hand Tool Set with 1 Three-Jaw Chuck and Hex End Pin Vise and 10 Twist Drill Bits for Delicate Manual Work
$11.56
$15.95
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- PINVISE AND DRILL BIT SET - Includes 1 piece of hand drill and 10 pieces of twist drill bits in 5 different metric bit sizes (2 x 1.0mm, 2 x 1.5mm, 2 x 2.0mm, 2 x 2.5mm, 2 x 3.0mm)
- MATERIAL - Pin vise and chuck are made of aluminum alloy
- Twist drill bits are made of high speed steel 4341
- The knurled handle and hex shaped swivel end is designed for comfort and grip. Swivel end for easy manual drilling.
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron
$14.99
$18.44
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant
- for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
Bestgle Wire Twisting Tools, 2.5/4 Flat 3 Lines & 5 Lines Universal Electrical Cable Quick Connector Wire Twister with Wire Stripper Expansion Adapter for Power Drill Driver
$12.69
$18.02
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- What you get: 1 x 2.5/ 4 Flat 3 Lines Wire Twisting Tool, 1 x 2.5/ 4 Flat 5 Lines Wires Stripper, 1 x Wire Twisting Tool Expander
- Made of high quality 45# precision steel for good performance, come with 3/8" hex shank, attached to impact driver and power drill
- Hollow hole design twisting expansion adapter, 9cm in length, can fix and lengthen the twisting tool to provide better twisting effect
- Ideal wire twisting tool will spontaneously peel off the insulating coat of wires before twisting them, improve work effiency
3 Pack Drill Bit Extension, 11.8 inch Flexible Screwdriver Power Soft Shaft Set With Screw Bits Holder, Magnetic Hexagon Flex Drive Tip For Computer Chassis, Electrical Cabinets, Furniture
$9.92
$11.71
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- 100% SATISFACTION GUARANTEED - Customer satisfaction is our highest priority, if for any reason you are not completely satisfied with our product we will immediately provide you a full refund (or replace your item).
- Flexible Shaft - Extend the reach of your screwdriver / drill with this 11.8 inch flexible shaft. Easily reach screws that are too inconvenient for an ordinary screwdriver like screws a few inches from a wall.
GOXAWEE Rotary Tool Kit (1.3amp) with MultiPro Keyless Chuck and Flex Shaft – 140pcs Accessories Variable Speed Electric Drill Set for Crafting Projects and DIY Creations
$39.98
$43.98
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- ❤Best Gift for Men, DIY Guys❤
- ❤Friendly Customer Service and 2 Year Warranty❤
- ★ Quick Change Drill Chuck - Come with 3 Jaw Universal Chuck applying better stability on your projects, allows you to quickly and easily change accessories on Rotary machine tool freely. GOXAWEE Multi Chuck accepts accessories from 1/64” to 1/8” shank, wider compatible than others. Ideal when the application requires numerous accessory changes.
uxcell Titanium Step Drill Bit 3mm to 13mm 11 Step Size 2 Straight Flutes Hex Shank for Metal Wood Plastic High Speed Steel
$7.24
$8.98
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- [HSS Construction]: High speed steel makes it last longer.
- [Hex Shank]: Hexagonal shank design prevents slip in drill chuck.
- [Titanium Coating]: Coated by titanium, this step drill bit performs well in heat, corrosion and rust resistance.
- [2 Straight Flutes]: Double cutting edges and X-type openings design ensure a faster and smoother cutting.
- [What You Get]: Includes 1 standard size drill bit: 3-13mm. Perfect for drilling holes in iron, metal, aluminum, copper, wood, plastic, PVC board and many other types of sheets.
Makita B-49373 75 Pc. Metric Drill and Screw Bit Set
$27.99
$31.91
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
- Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
- Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
- Includes (19) titanium nitride coated high speed steel (hss-tin) metal and wood drill bits with size range of (1 - 8mm)
4 1/2 Inch Diamond Hole Saw Diamond Tipped Porcelain Tile Ceramic Glass 4.5 Inch Hole Saw Drill Bit Standard Shank Easy To Use by DRILAX
$36.99
$54.75
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- 4 1/2" Diamond Coated Hole Saw Drill Bit. You will get a perfect 4.5 inch hole through some really tough material.
- Right size for drilling a hole through tiles for new toilet. Cuts Through Ceramic, Porcelain, Glass, Marble, Granite
- Wet Type. Do not use dry. Pour water or built a dam around the cutting area with plumbers putty and fill it with water
- Drills 1 inch deep.
- There is no need for a Pilot Drill Bit. Pilots are not safe for glass.
Forney 72417 Grinding Stone, Cylindrical with 1/4" Shank, 2-1/2" by 1/2"
$10.67
$12.06
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- Shank mounted points and grinding wheels are made from durable high grade 60 grit aluminum oxide
- Perfect for grinding, polishing or deburring ferrous metals
- Use with 1/4 inch chuck for high speed drills
- Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly
- Max RPM is 3,450
Makita D-59178 18 Pc. Assorted Drill Bit Set
$19.99
$29.79
Amazon.com
Last update was on: November 24, 2024 12:16 pm
- Includes bits for drilling in metal, wood and masonry materials
- Metal drilling bits are made of hss-g for longer life
- Metal drilling bits have a 135° split point geometry for fast starts and reduced walking
- Brad point wood drill bits provide clean, straight holes in wood
- Masonry hammer drill bits can be used in most hammer drills for drilling into brick, block and concrete
