lifeeconomic 
Best results for drill bit grinding wheel
Enkay 387-3C3-Inch Diamond Wheel, 1/4-Inch Shank, Carded
40PCS Rotary Grinding Bit Set, 10PCS Diamond Cutting Wheel (22mm) + 20pcs Diamond Grinding Burr Drill Bits Sets + 10PCS Abrasive Mounted Stone Grinding Wheels Bits (3mm Mandrel)
$11.99
$16.79
Amazon.com
Last update was on: May 12, 2024 4:26 pm
- Package Included : 20pcs Diamond Grinding Burr Drill Bits Sets, 10PCS Abrasive Mounted Stone Grinding Wheels Bits Sets, 10PCS Diamond Cutting Wheel (22mm) with 2PCS 3mm Mandrel
- Diamond cutting disc Size: 22mm. Evenly coated with diamond particles, Suitable for cutting gems, glass, ceramics, tiles, rocks, aluminum and copper
- Diamond rotary burr set 6 size:6mm head, 3mm handle, length 45mm. Evenly coated with diamond particles, Different grinding heads for grinding, engraving, cutting, polishing, engraving and etching, for hard materials such as stone, glass, metal, hardwood, ceramic tile, ceramic, marble, granite.
CZS Drill Bit Sharpener Portable Diamond Drill Bit Sharpening Tool Corundum Grinding Wheel for Iron-based Drill Bits Fit Width Range 5/64”-1/2” (2-12.5mm),One Extra Corundum Grinding Wheel and Wrench
$10.39
$13.30
Amazon.com
Last update was on: May 12, 2024 4:26 pm
- 【Application】This diamond Drill Bit Sharpener is mainly used for grinding iron drills, not suitable for other high hardness drills.
- 【Easily Increase the Life of Drill Bits】Forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools. Improve the utilization of drill bits, solve the troubles you have been buying drill bits, save time and save money.
General Tools 825 Drill Grinding Attachment
$24.38
$36.08
Amazon.com
Last update was on: May 12, 2024 4:26 pm
- The General Tools and Instruments 825 Drill Grinding Attachment extends the life of your drill bits by sharpening them back to factory tolerances
- The angle adjustment gauge allows you to match the point angle of nearly any bit, and even works on countersinks
- Designed with a pivoting neck for simple grinding of both sides of the bit
- The Drill Grinding Attachment is intended for use with ANSI, OSHA and UL approved standard electric bench grinders or surface grinders
1/8" Shank Diamond coated Cylindrical Grinding Mounted Point Bits Burrs Fits Dremel Type Rotary Tool , 4 mm head , 10 pcs
Drill Doctor DA31320GF 180 Grit Diamond Replacement Wheel for 350X, XP, 500X and 750X
DEWALT DW4961 4-Inch by 2-Inch by 5/8-Inch -11 Concrete/Masonry Grinding Steel Backed Cup Wheel
Dremel EZ406-02 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit
Rocaris 40Pcs 1" (25mm) Abrasive Wheel Buffing Polishing Wheel Set For Dremel Rotary Tool
$9.99
$11.59
Amazon.com
Last update was on: May 12, 2024 4:26 pm
- SIZE - Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel
- ABRASIVE BUFFING WHEEL SET - Each grit 10pieces, total 40pieces, Brown 120Grit,Green 180Grit,Red 320Grit,Black 400Grit
- REPAIR THE DENTS - Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing
- CONVENIENT AND PRACTICAL - Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost
Forney 60053 Mounted Grinding Stone with 1/4-Inch Shank, 2-Inch-by-1/2-Inch
HOYIN 6Piece Wire Wheel Cup Brush Set|0.0118In Coarse Crimped Carbon Steel|1/4In Round Shank|for Drill
$8.99
$10.43
Amazon.com
Last update was on: May 12, 2024 4:26 pm
- Removing weld scale spatters,extra-heavy rust and corrosion, paint and dirt and glitch from metal and other surface.
- Use for surface roughening,for adhesion and finsish preparation perior to plating or painting,stripping paint from surfaces like wood.
- For use on steel and finish preparation.
- 0.0118 in. carbon steel crimped wire for longer life.
- For operation at speeds up to 4,500RPM,1/4 in. shank suitable for drill.
Vermont American 16710 3/4-Inch by 1-1/4-Inch Useable Length Cylinder Metal Grinding Point
Forney 72417 Grinding Stone, Cylindrical with 1/4" Shank, 2-1/2" by 1/2"
$10.67
$15.26
Amazon.com
Last update was on: May 12, 2024 4:26 pm
- Shank mounted points and grinding wheels are made from durable high grade 60 grit aluminum oxide
- Perfect for grinding, polishing or deburring ferrous metals
- Use with 1/4 inch chuck for high speed drills
- Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly
- Max RPM is 3,450
F-ber 1pc Silver 9.4 x 53mm/3/8" x 2" Round Diamond Pen Dresser Grinder Shank Grinding Wheel Single Point Abrasive Tool
SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150
$7.95
$9.70
Amazon.com
Last update was on: May 12, 2024 4:26 pm
- Titanium-coated diamond burrs
- Assorted shapes and sizes include: ball, cone, cylinder, needle point, and tapered
- All burrs with a 1/8" shank - compatible with most die grinders or rotary tools
- A versatile set for numerous projects with grits 120-150
- Highly recommended for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more
100pcs Multifunctional Wool Felt Mandrel Mounted Grinding Polishing Accessories Attachment Set – Fit Dremel-1/8 Inch Shank
$17.28
$22.12
Amazon.com
Last update was on: May 12, 2024 4:26 pm
- Material: high-quality wool head.
- Application: works great for polishing,grinding. carving or gunsmithing, like
- jewelry,gemstones,glass,watches,crystal,car,motorcycle,bike,feed ramps or trigger jobs etc.
- Best effect used with electric drills, grinders or Dremel rotary tools. Make your polished goods more cleaner and brighter.
- with 50pcs Cylinder shaped grinding heads, and 50pcs Tapered shaped, different sizes of them (Diameter: 10mm, 8mm, 6mm, 5mm, 4mm) 1/8 Inch Shank
