lifeeconomic 
Best results for drill and tap guide chart
Screw Chek’r SAE/ Inch Screw Thread Size Gauge (No. 1 to 5/16) 1/8 Inch Heavy Gauge Steel Screw Checker, Made in USA
$15.05
$19.26
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Say goodbye to frustration with this easy to use, pocket sized tool. Do it yourselfers, handymen, and mechanics can save time and money by accurately identifying different types of screws the first time. This tool gives all the information needed to properly identify machine screws, wood screws, sheet metal screws, bolts, and even cotter pins and rivets.
- Identifies diameter, size, pitch, and length, with a tap drill chart for sizes ranging from No. 1 through 5/16 inch in NC, NF, and NS pitches. This tool can also be used to straighten bent screws and clean dirty or rusty threads.
Marine Bolt Supply Nut, Bolt & Screw Gauge Standard & Metric Coarse & Fine Diameter, Length & Thread Pitch (Red)
uxcell Machine Tap 9/16-12 BSW Thread Pitch H2 4 Straight Flutes High Speed Steel
$13.31
$16.90
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Thread Size: 9/16-12 BSW
- Shank Side Width: 9mm / 0.35 inch
- Thread Length: 32mm / 1.26 inch
- Material: HSS (High Speed Steel)
- Total Length: 95mm / 3.74 inch
- Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
Nut & Bolt Thread Checker (Inch & Metric)
$27.30
$39.59
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Each size has a nut and bolt checker on the same gauge. 26 male/female gauges - 14 inch & 12 metric.
- Thread sizes are permanently stamped onto each gauge (inch in red, metric in white)
- Inch gauges are clear zinc plated, metric gauges are black oxide.
- The individual gauges rotate freely on the wire cable for fast thread verification
- Wire cable with loop for convenient hanging
uxcell Metric Machine Tap M8 Thread 1.25 Pitch H2 Accuracy 3 Flutes High Speed Steel
uxcell Machine Tap 1/16-27 NPS Straight Pipe Thread 4 Flutes High Speed Steel
$10.38
$11.94
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Thread Size: 1/16-27 NPS
- Thread Length: 16mm / 0.63 inch
- Shank Side Width: 6mm / 0.24 inch
- Material: HSS (High Speed Steel)
- Total Length: 55mm / 2.17 inch
- Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
Calculated Industries 4088 Machinist Calc Pro 2 Advanced Machining Math with Materials
$80.66
$95.99
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Machining-specific keys: surface feet per minute, inch per tooth, inch per minute, inch per revolution, # of teeth, depth of cut, width/length of cut
- Choose from 20 popular materials and six different processes - face milling, end milling, slot milling, turning, boring, and drilling
- Calculate for cutting speed, spindle speed (RPM), feed rate (IPM), cutting feed, feed per tooth/chip load, # of Teeth, Radial Chip Thinning adj factor
Stainlesstown Nut Bolt Thread Gauge (Blue)
$8.95
$12.35
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Measures diameter, thread pitch & length of nuts, bolts & screws
- Measures fractional bolts from size #4 to 1" up to 7" long
- Measures metric bolts & screws from size 3mm to 22mm
- Made of very durable 1/4" thick hard plastic
- 1/4" thick x 8-3/4" Long x 3-3/8 Wide
Woodstock D4141 Drill-Gauge Set, 3-Piece
uxcell Metric Hand Tap M20 Thread 1 Pitch 4 Straight Flutes H2 Alloy Tool Steel 1 Pair
Huot 12250 Drill Bit Gauge for Fractional Sizes 1/16" to 1/2" in 1/64" Increments
Boltsize-It Gauge, Blue
$9.41
$10.45
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Quickly and easily size bolts, screws, nuts and twist drills
- Features ruler marked with inches and millimeters
- Gauge metric hex nuts and washers by holding under metric holes
- Resists water, alcohol, oil and grease
- Made of hard plastic
Screw Chek’r SAE/Inch Screw Checker (No. 4 to 1/2) 1/8 Inch Heavy Gauge Steel Screw Checker, Made In USA
$16.54
$22.49
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Say goodbye to frustration with this easy to use, pocket sized tool. Do it yourselfers, handymen, and mechanics can save time and money by accurately identifying different types of screws the first time. This tool gives all the information needed to properly identify machine screws, wood screws, sheet metal screws, bolts, and even cotter pins and rivets.
- Identifies diameter, size, pitch, and length, with a tap drill chart for sizes ranging from No. 4 through 1/2 inch in the UNC and UNF pitches. This tool can also be used to straighten bent screws and clean dirty or rusty threads.
Goodman 10 KW Electric Heat Kit for Smart Frame Air Handler HKSC10XC
$97.00
$110.58
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Sequencers for better temperature control
- Multiple branch circuit capability
- Completely assembled and tested
- Control circuitry arranged to readily permit staging
- Factory-installed circuit breakers available on specific models (See Electrical Data)
HY-KO PRODUCTS CO FM-6/2 FLOATING MOUNT HOUSE NUMBER 6" BLACK # 2
$9.50
$10.64
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Distinctive mounting system that allows for the numbers to flush mount or stand slightly away from the wall
- Creates 3D Effect
- Crafted in modern, easy-to-read font
- Large size meets many 911 community requirements
- Includes mounting hardware and floating-mount template for quick and easy installation
Golds Gym* XRS 20 Olympic Workout Bench
Amazon.com
Last update was on: November 23, 2024 2:06 pm
- Multiple Bench Incline Positions Various incline positions offer countless exercise options and proper exercise form, to target different muscle groups. 6 Foam Leg Developers Build and develop quads, hamstrings, glutes, and hip-flexors with the built-in leg developer system.
- Rolled Preacher Pad Comfortably isolate specific muscles in your upper body while ensuring proper exercise form. Removable Curl Yoke Build muscle in your upper body and target biceps with the removable curl yoke.
