lifeeconomic 
Best results for byrd helical head planer
Byrd Tool woodworking Shelix OEM Size cutterhead for Dewalt planer DW735
$429.00
$489.06
Amazon.com
Last update was on: November 23, 2024 7:25 am
- This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.
- Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.
- Helical insert knife configuration breaks up chips, making dust collection easier.
Grizzly H7764 Byrd Tool 6-Inch Shelix Cutterhead
$328.95
$378.29
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Made in the USA by Byrd, these indexable carbide insert cutterheads are very well made and leave a great finish
- The inserts are positioned along a spiral pattern and rotate at a slight angle for a shearing action that leaves a glassy smooth cut on the toughest
- Comes with all 30 inserts on the cutterhead, plus 5 extras
OSCARBIDE Carbide Inserts Byrd Shelix Replacement Cutters (15x15x2.5mm R100-81°) 15mm Square Woodworking Cutters with 4" Edge Radius,10pcs/pack
$27.74
$32.73
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Carbide Cutters Size:15mmx15mmx2.5mm-R100(81°),4 indexable cutting edge,30* Cutting bevel, polished to a mirror finish for smoother cutting work
- Made of solid tungsten carbide,own longer use life,sharp and durable
- Easy to operate,each blade has 4 sharp edges,if one is dull, just change it to the other side
- Replacement Carbide inserts specially Fits Byrd Journal Helical cutter head
- 10 pieces per box,packed with a plastic container for safe and easy storage
YUFUTOL 4 Inches Face Radius Carbide Cutter Insert For Wood Working(15mm length X15mm width X2.5mm thickness) Fits Byrd Journal(Helical) Heads,Pack of 10, Wood working Replacement inserts
$25.99
$37.69
Amazon.com
Last update was on: November 23, 2024 7:25 am
- K05 solid carbide cutter inserts providing you a better experience and durable use to general purpose wood, chipboard, plywood, MDF/HDF.
- Excellent replacement carbide insert cutter specially Fits Byrd Journal Helical head,pack of 10
- Four usable sides(15mmX15mm), with 4" Face Radius R100mm, Radius Corner,and all are of the same sharpness
- If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
Shelix Carbide Inserts – Box of 10 – Fits Byrd Cutterheads – 15mm x 15mm x 2.5mm
OSCARBIDE 10.5mm Square Straight Carbide Inserts Cutters (10.5×10.5×2.0mm-35 Cutting Angle) Replacement for Spiral/Helical Planer Cutter Head Wood Turning Tools,10 pieces
$23.99
$35.51
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Made of solid tungsten carbide KT30U, Suitable for processing Hard wood/soft wood
- 10.5 mm straight square face, No face & corner radius, Designed for numerous spiral/helical planer cutter head system.
- Four usable edge(10.5mm lengthX10.5mm width X2.0mm Thick-35* Cutting angle, and all are of the same sharpness.
- If one knife edge is dull or nicked, just turn it to another edge which greatly reduces your down time.
DLtools 11mm Tungsten Carbide Cutter Insert Set-2" Side Radius Square Carbide Insert Replacement Cutters (11X11X2.0)4-Edge for Woodworking Lathe Turning Tools,pack of 10
$26.99
$39.68
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Best material-Made of solid tungsten carbide, providing you a better experience and durable use
- Most professional-11mm square with 2"Radius straight carbide insert,Designed for numerous spiral/helical planer cutter head system,wood lathe Tools
- Most practical-Easy to replace your jointers and planers, excellent accessory for wood turning work.
- Most convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
YUFUTOL 4" Radius Face R-100mm Wood Turning Carbide Replacement Cutter Insert(15mm length X15mm width X2.5mm thickness) -corner radius,Pack of 10,Fits wood Turning lathe Tools
$27.99
$40.59
Amazon.com
Last update was on: November 23, 2024 7:25 am
- K05 solid carbide cutter inserts providing you a better experience and durable use to general purpose wood, chipboard, plywood, MDF/HDF.
- Excellent accessory for wood turning, Not Fits BYRD,mounted with flat crew M6-8mm
- Four usable sides(15mmX15mm), with radius face -R100mm, radius corners, and all are of the same sharpness
- If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
DLtools 12mm Carbide Inserts for Wood- (12mmX12mmX1.5mm)4-Edge Square Straight Carbide Insert Replacement Cutters for Woodworking Lathe Turning Tools,10 pcs
$26.99
$34.82
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Best material-Made of solid tungsten carbide, providing you a better experience and durable use
- Most professional-12mm(length)X12mm(width)X1.5mm(thickness) square straight carbide insert,Designed for numerous spiral/helical planer cutter head system,wood lathe Tools
- Most practical-Easy to replace your jointers and planers, excellent accessory for wood turning work.
- Most convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
Byrd Tool Shelix cutterhead for Dewalt planer DW735
$385.38
$466.31
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Cutterhead diameter is 0.088" (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts.
- C3 carbide cutters lasts an average of 10 times longer per side (4 sides = 40x) than traditional steel knives.
- Spiraled to break up chips for dust collection, shear to give clean cutting action
- True helical cut (slices the wood) which greatly reduces noise and tearout
Dark Stone spiral Cutter Head for Dewalt DW735 planer
$399.00
$562.59
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Outstanding finish compared to HSS straight knives
- Chip out is nearly non-existent with spiral shearing action
- Reduced noise
- Improved dust collection
- Extreme long life with 4-sided carbide insert knives that are easy to replace.
DLtools 15mm (Ci1) Square Straight Carbide Insert Cutter(15X15X2.5mm)4-Edge,for Spiral/Helical Planer Cutter Head Wood Turning Lathe Tool (10pcs)
$26.59
$33.24
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Made of K10 Solid Tungsten Carbide provide you a better experience and durable use
- Four usable edges:15mm lengthX15mm width X2.5mmThick-30° Cutting angle
- Easy to replace your hand tools and planers(fit for EWT-Ci1), excellent accessory for carpentry
- Most convenient- If one knife edge is dull or nicked, just turn it to another edge which greatly reduces your down time
- Best manufacturers-We choose the best manufacturers to provide you with the best products
DLtools 14mm Square Straight Tungsten Carbide Cutter Insert(14X14X2.0) for Wood Working Spiral/Helical Planer Cutter Head and Popular Full/Pro Wood Lathe Turning Tool (1pcs)
$7.99
$9.51
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Best Material-Made of solid tungsten carbide, providing you a sharp and durable use
- Standard Size-14mm(length)X14mm(width)X2.0mm(thickness) square straight with 4 edges,30 degree cutting angle.
- Most Practical-Easy to replace your hand tools and planers, excellent accessory for carpentry.
- Most Convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
DLtools 6"Radius Square Tungsten Carbide Insert,(15mmX15mmX2.5mm-R150) 4-Edge Inserts Fit for Planer/Helical Cutters Head and Full/Pro Wood Turning Tools Replacement, Pack of 10
$25.99
$33.01
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Best material-Made of solid tungsten carbide, providing you a better experience and durable use
- Most professional -15mmX15mmX2.5mm(thickness)-R150,30 degree cutting angle，We have more than 10 years of experience in the alloy industry.
- Most practical-Easy to replace your hand tools and planers, excellent accessory for carpentry.
- Most convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
DLtools 4" Radius Square Tungsten Carbide Insert,(15mmX15mmX2.5mm-R100) 4-Edge Inserts Fit for Planer/Helical Cutters Head and Full/Pro Wood Turning Tools Replacement, Pack of 10
$26.19
$31.95
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Best material-Made of solid tungsten carbide, providing you a better experience and durable use
- Most professional -15mmx15mmx2.5mm(thickness)-R100,30 degree cutting angle，We have more than 10 years of experience in the alloy industry.
- Most practical-Easy to replace your hand tools and planers, excellent accessory for carpentry.
- Most convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
Byrd Tool H7354 Tool Shelix Indexable Carbide Inserts, 10-Pack
Byrd Tool H7769 Shelix Cutterhead, 20-Inch
$1,022.95
$1,309.38
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Made in the USA by Byrd these indexable carbide insert cutter heads are very well made and leave a great finish
- The inserts are positioned along a spiral pattern and rotate at a slight angle for a shearing action that leaves a glassy smooth cut on the toughest
- Each cutter head comes with included inserts plus 5 extras
DLtools 11mm Square Carbide Insert Cutter 4-Edge(11mm Length X11mm Width X2.0mm Thickness) for Wood Working Woodturning tools,pack of 10
$26.99
$39.68
Amazon.com
Last update was on: November 23, 2024 7:25 am
- Best material-Made of solid tungsten carbide, providing you a better experience and durable use
- Most professional-11 mm(length)X11mm(width)X2.0mm(thickness) square straight carbide insert,Designed for numerous spiral/helical planer cutter head system,wood lathe Tools
- Most practical-Easy to replace your jointers and planers, excellent accessory for wood turning work.
- Most convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
