lifeeconomic 
Best results for ar 15 buffer and spring
Grip 9 pc Roll Pin Punch Set Gunsmithing
MulWark 10pcs Gun Bolt Catch Roll Pin Punch Set & 35mm Small Double-Faced Soft Rubber Mallet Hammer Tool Kit – Corrosion Resistant Hand Pin Remover Tool with Holder for Automotive, Gunsmithing, Watch
$19.99
$26.19
Amazon.com
Last update was on: November 22, 2024 8:25 am
- ▲ Use drop forged and heat treated steel to offer extreme durability, and the long, parallel ground shanks with knurled handle can achieve better grip, and come with a fashionable orange punches pouch that make it more standing out in your tool room and decrease the tediousness of repair/building work
- the nylon storage case also offers a great organizing solution for the punches
- ▲ The high quality chrome-vanadium steel with around hardness of 50 HRC can eliminate bending, flexing or broken when punched on
CVLIFE 6-9 Inches Tactical Rifle Bipod Adjustable Spring Return with Adapter
$18.99
$25.45
Amazon.com
Last update was on: November 22, 2024 8:25 am
- With return springs and leg release button, the leg length can be adjusted from 6 inches (152mm)to 9 inches(225mm).
- Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.
- Adjustable leg length: 5 settings for different length, the bipod is ready to meet your needs.
- Quickly attach to or detach from the rifle using existing swivel stud.
- Foldable arms with spring tension control. Come with the mount adapter.
Tactical Atlas AR-15 M4 M16 Gun Cleaning Mat | American Flag | mil-spec field strip | Doubles the size of most other gun cleaning mats | HD quality photos | 26” x 17”
Slip2000 EWG 4oz.
$20.31
$24.58
Amazon.com
Last update was on: November 22, 2024 8:25 am
- This lube stays wet 5 times longer then any other traditional lubricant. Reduces friction and wear
- Protects against corrosion and will not attract dust, dirt or sand and works in all types of environments
- Will not burn off like a petroleum products and is safe to use on metal, wood, plastic parts
- Does not allow carbon, copper, lead and plastic to stick and will reduce cleanup time by 50%
Compression Spring, Stainless Steel, Metric, 4.5 mm OD, 0.5 mm Wire Size, 5.11 mm Compressed Length, 10 mm Free Length, 7.78 N Load Capacity, 1.51 N/mm Spring Rate (Pack of 10)
$16.21
$18.48
Amazon.com
Last update was on: November 22, 2024 8:25 am
- Stainless steel 301, 302 or 304 wire offers good mechanical properties with greater corrosion and heat resistance than music wire
- Spring ends are closed (squared), but not ground for efficient force transfer and reduced possibility of tangling
- Load capacity of 7.78 newtons
- Maximum operating temperature of 500 degrees F (260 degrees C)
- All dimensions and forces meet DIN 2095 (Grade 2)
Magpul Industries USA Mbus Generation Ii Backup Sights Front & Rear Set
$80.55
$114.38
Amazon.com
Last update was on: November 22, 2024 8:25 am
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily Activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc
- Clamps to any MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard A2 irons
- NOT for railed gas Blocks
OTW Flip Up Sight 45 Degree Offset Rapid Transition Front and Backup Rear Sight Iron Sight
$16.99
$22.77
Amazon.com
Last update was on: November 22, 2024 8:25 am
- Flip Up Front Sight and Back Up Iron Sight with Spring Load Push Button.
- Front Sight and Rear Sight Post fold down out of view of your optics when not in use.
- Rear Sight:Windage Adjustable features same MOA adjustment as standard sight.
- Front Sight:A2 Front Sight post is fully Adjustable for Elevation.
- 20mm Picatinny Weaver Rail Mounted BUIS 45 Degree Angled Low Profile Iron Sights
Magpul MBUS Front & Rear Flip Up Backup Sight GEN 2-247-248 – Flat Dark Earth
$81.00
$113.40
Amazon.com
Last update was on: November 22, 2024 8:25 am
- Polymer
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same height-over-bore as standard A2 irons
Real Avid The Pistol Tool
$35.42
$39.67
Amazon.com
Last update was on: November 22, 2024 8:25 am
- BE PREPARED FOR ANY TASK AT THE RANGE OR IN THE FIELD: with the 19-in-1 Pistol Tool you can breakdown, tweak, accessorize and adjust your favorite handgun whenever, wherever
- ALLEN WRENCHES FOR ADJUSTING LASER SIGHTS ARE STORED ON THE TOOL: the 1/16", .05", .035", .028" Allen wrenches are stored on the tool so you always know where they are
- QUALITY GUNSMITHING BITS LOCK INTO THE TOOL: the 3/16" Flat, 1/8" Flat, #2 Phillips, #1 Phillips, 3/32" Hex, T15 Torx have ball detents are square cut hollow ground to prevent stripping
Magpul MOE Rifle Stock, Black
$74.99
$86.99
Amazon.com
Last update was on: November 22, 2024 8:25 am
- Mounts to rifle-length receiver extension tube without A2 spacer (not included)
- Can be adapted for use with dozens of different rifle and shotgun chassis
- Sloping cheek weld combines a slim profile with user comfort
- Overall shape provides for offhand hold options
- Rubber butt-pad provides positive shoulder purchase to prevent slippage
- Large storage compartment easily accessible behind hinged butt-plate
