Top 10 Aprilaire 4040 Solenoid Valve Home Depot

Proper humidification of your home is important for protecting your family’s health and the beauty of your home. The 4040 24 Volt Solenoid Valve controls the amount of water that enters your humidifier, ensuring that the right amount of humidity is delivered into the air every time it turns on. Usually installed by your contractor, the solenoid valve is part of the core of your humidifier, making it possible for you to adjust moisture levels with precision and accuracy.

AMI PARTS 4040 Yellow Solenoid Valve Replacement for Humidifier 24V 2.3W ,10006735.

Technical Parameters: 24 V, 60 Hz AC, 125 PSI.

Ensures that the right amount of humidity is delivered into your home.

Controls how much moisture enters your humidifier, making it possible to maintain proper humidity levels throughout your home.

24V solenoid valve replacement. Allows water to flow into your humidifier.Compatible with most Aprilaire home humidifiers.

NOTE:Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.

AMI PARTS 4040 Blue Solenoid Valve Replacement for Humidifier 24V 2.3W, B2017-S85.

Fits models: 220, 224, 400M, 440, 500, 500A, 400, 400A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.

Does not work on models: 330, 445, 110, 112, 350 and 360.

Both the inlet and outlet are threaded 7/16″-24 UNS for accepting a compression fitting for 1/4″ tubing.

Inlet and outlet ports are reversible to fit a wider variety of humidifiers.

NOTE:Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.

About:
The 4040 by Eagleggo is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.

Specifications:
Volts: 24/60
Watts: 2.3
MOPD: 125
Orifice: 3/32
-Both the inlet and outlet are threaded 7/16″-24 UNS for accepting a compression fitting for ¼” tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.

Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.

Does not work on models 330, 445, 110, 112, 350 and 360.

For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz

Note:
The brand we mentioned is only to illustrate the suitability of the product, not as a trademark.

Wide application:
The solenoid valve is compatible with Aprilaire models, such as 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768, doesn’t work on models 330, 445, 110, 112, 350 and 360.

Installation steps:
Firstly, disconnect the humidifier and shut off the water supply to the unit.
Secondly, remove the solenoid. Unclip the wires from the solenoid. Using the adjustable wrench to unscrew the compression nut and then remove the distributor and tube. Let remaining water drain into the plastic container. Disconnect the water supply. Use a screwdriver to unscrew the screws and discard the old.
Thirdly, install the solenoid. Align the new solenoid and then tighten the screws. Connect the water supply line. Replace the distributor tube and tighten the compression nut.
Finally, connect the wires to the solenoid and reconnect the humidifier.

Specification:
Model No.: B2015-S85/ B2017-S85
Watts: 2.3 watts
PSI: 125
Volt: 24 V
Orifice: 3/32 inch, 1/4 inch
Material: brass and copper wire

Package includes:
1 x Humidifier valve

Proper humidification of your home is important for protecting your family’s health and the beauty of your home.The 4040 24 Volt Solenoid Valve controls the amount of water that enters your humidifier,ensuring that the right amount of humidity is delivered into the air every time it turns on.Usually installed by your contractor, the solenoid valve is part of the core of your humidifier,making it possible for you to adjust moisture levels with precision and accuracy.

Features:

Application:
The 4040 solenoid valve is compatible with majority Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360.

Replace numbers:
332226, 59000, 4040, 40-40, 52P90, 5900063, 5F-D1RA-Q1OQ, 683786072210, 686720404016, APR4040, B00HSFN1RY, B00V8CFBPS, B018HBRMKO, CI4040, GA4040 and O1-UGBC-FCJ3.

Installation steps:
Step 1: disconnect the humidifier: shut off the water supply to the unit.
Step 2: remove the solenoid: unclip the wires from the solenoid, using the adjustable wrench to unscrew the compression nut and then remove the distributor and tube, then let any remaining water drain into the plastic container, disconnect the water supply, use a screwdriver to unscrew the screws and discard the old solenoid.
Step 3: install the solenoid: align the new solenoid and then tighten the screws, then connect the water supply line, replace the distributor tube and tighten the compression nut, finally connect the wires to the solenoid.
Step 4: reconnect the humidifier.

Specification:
Material: brass and copper wire
Model number: 4040
Watts: 2.3
Orifice: 3/ 64
Volt: 24/ 60V
MOPO: 125

Package quantity:
1 x 4040 Solenoid valve

Note:
All the brand names and models mentioned are not applied as trade marks, just work as product adaptability.

Widely applied:
Compatible with Aprilaire humidifiers models of 110, 112, 220, 224, 350, 360, 440, 550, 550A, 550-A, 558, 560, 560A, 560-A, 568, 600, 700, 760, 760A, 760-A and 768.
Replace number of A2012-S118, B2035-S2, B2035-S5, B2035-S54, B2035-S55, B2015-S51, B2015-S54, B2015-S58, B2015-S65, B2015-S68, B2015-S85 and B2015-S87.

How to install:
Step 1: disconnect the humidifier, shut off the water supply to the unit.
Step 2: remove the old solenoid: unclip the wires from the solenoid, using the adjustable wrench to unscrew the compression nut and then remove the distributor and tube. Let any remaining water drain into the plastic container. Disconnect the water supply and use a screwdriver to unscrew the screws and discard the old solenoid.
Step 3: install the solenoid: align the new solenoid and then tighten the screws. Connect the water supply line. Replace the distributor tube and tighten the compression nut. Finally connect the wires to the solenoid.
Step 4: reconnect the humidifier

Specifications:
Model No.: A2012-S150
Pressure: 125 PSI
Volt: 24 VAC
Frequency: 50/60 Hz
Material: brass and copper wire

Package includes:
1 x A2012-S150 solenoid valve

Our 4040 24V humidifier solenoid valve replacement is made of brass material is of the best quality,approved and recommended for everyone.Due to this top class material you are guaranteed of longer durability.You will never have to worry on your 4040 24V humidifier solenoid valve in years if not a decade.Getting your 4040 24V humidifier solenoid valve replacement installed will never be your worry anymore as it is easy to install and takes you the shortest time possible.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Aprilaire 4040 Solenoid Valve Home Depot, eg:

• What are Top 10 Aprilaire 4040 Solenoid Valve Home Depot for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Aprilaire 4040 Solenoid Valve Home Depot to buy?
• What are Top Rated Aprilaire 4040 Solenoid Valve Home Depot to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Aprilaire 4040 Solenoid Valve Home Depot?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Aprilaire 4040 Solenoid Valve Home Depot.
• Before deciding to buy any Aprilaire 4040 Solenoid Valve Home Depot, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Aprilaire 4040 Solenoid Valve Home Depot and What you should consider when buying the Aprilaire 4040 Solenoid Valve Home Depot and Where to Buy or Purchase the Aprilaire 4040 Solenoid Valve Home Depot. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Aprilaire 4040 Solenoid Valve Home Depot of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Aprilaire 4040 Solenoid Valve Home Depot.