lifeeconomic 
Best results for letter c drill bit
Century Drill & Tool 11600 Letter Gauge Drill Bit, Size-C
TopLine USA Drill Bits Size C M42 Cobalt 4-Pk
Drill America R x 6" High Speed Steel Aircraft Extension Drill Bit (Pack of 6), DWDA/C Series
$116.84
$161.24
Amazon.com
Last update was on: November 24, 2024 2:49 am
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Drill America TSD Series M42 Cobalt Steel Short Length Drill Bit, Gold Oxide Finish, Threaded Shank, Spiral Flute, 135 Degrees Split Point, C Size (Pack of 25)
$140.14
$203.20
Amazon.com
Last update was on: November 24, 2024 2:49 am
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- Threaded shank is for use with threaded-spindle tools, often used in aerospace and automotive applications
Cleveland 2002G TC Style High Speed Steel Jobbers’ Drill Bit, TiCN Coated, Round Shank, 118 Degree Point, Letter Size C (Pack of 12)
Amazon.com
Last update was on: November 24, 2024 2:49 am
- High-speed steel (HSS) containing vanadium is a good combination of toughness and high red hardness, for use on drilling through hard substances
- Titanium carbonitride (TiCN) is harder than TiN, to help provide heat resistance for more abrasive materials
- 118-degree with improved geometry, for performance in general drilling applications
- Jobber-length, for a wide range of applications
- Round shanks, for use with a variety of tool holders
Cleveland 2001G Style High Speed Steel Jobbers’ Drill Bit, Black Oxide, Round Shank, 118 Degree Point, Letter Size C(Pack of 12)
$46.77
$68.28
Amazon.com
Last update was on: November 24, 2024 2:49 am
- Vanadium steel for greater heat resistance than high-speed steel (HSS)
- Black oxide improves lubricity, resists corrosion, and resists flaking, and also helps prevent buildup of material on the tool’s cutting edge
- Jobber-length, for a wide range of applications
- 118-degree conventional point angles, for general drilling applications
- Round shanks, for use with a variety of tool holders
- Made in the USA
Drill America C Cobalt Heavy Duty Split Point Stub Drill Bit (Pack of 12), D/ASTCO Series
$43.63
$56.28
Amazon.com
Last update was on: November 24, 2024 2:49 am
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm
$239.99
$340.79
Amazon.com
Last update was on: November 24, 2024 2:49 am
- New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.
- Integrated: With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
- Software: The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.
Forney 20235 Drill Bit Letter HSS 118-Degree Split Point Jobber Length, Letter C
$9.31
$10.80
Amazon.com
Last update was on: November 24, 2024 2:49 am
- For general purpose production drilling
- Various materials such as cast iron, steel and steel forgings
- Steam oxide finish and surface treatment
- Provides abrasion resistance and improved chip flow
- Jobber length "Letter" drill bit with 118-degree point
Chicago Latrobe 150ASP-TN High-Speed Steel Jobber Length Drill Bit, TiN Coated, Round Shank, 135 Degree Split Point, Letter Size C (Pack of 12)
Amazon.com
Last update was on: November 24, 2024 2:49 am
- Jobber length drill bit has a midrange drilling depth for general-purpose applications
- High-speed steel (HSS) provides hardness for wear resistance
- Titanium nitride (TiN) coating offers increased wear resistance, extended tool life, and higher hardness on ferrous and nonmetallic materials
- 135-degree split point that penetrates hard material without a pilot hole or 135-degree conventional point for general-purpose drilling applications, depending on diameter size
Drill America C Cobalt Drill Bit (Pack of 12), DWDCO Series
$22.56
$33.61
Amazon.com
Last update was on: November 24, 2024 2:49 am
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Drill America C Carbide Tipped Drill Bit, D/ACT Series
$27.04
$31.10
Amazon.com
Last update was on: November 24, 2024 2:49 am
- Carbide tipped drills feature heavy-duty construction and heat treated body for optimum wear resistance and support of the carbide tip
- Used in the production of cast iron, non-ferrous metals, and many composite materials such as hard rubber or copper alloys
- Not recommended for drilling steel.
- Jobber (standard) flute and overall length
Cleveland 2175A Cobalt Steel Jobbers’ Length Drill Bit, TiAIN-Coated, Round Shank, 135 Degree Notch Point, Letter Size C (Pack of 10)
Amazon.com
Last update was on: November 24, 2024 2:49 am
- 135-degree angle, notched-point provides ease of penetration when starting holes and prevent walking
- High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances
- Screw machine length, for better rigidity and increased strength
- Titanium aluminum nitride (TiAIN) coating, for high-temperature, high-speed machining and without coolant
Drill America C Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series
$42.21
$55.72
Amazon.com
Last update was on: November 24, 2024 2:49 am
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Cleveland 3780 Cobalt Steel Jobbers’ Length Drill Bit, Short Flute, Black Oxide, Round Shank, 135 Degree Split Point, Letter Size C (Pack of 10)
$72.40
$89.78
Amazon.com
Last update was on: November 24, 2024 2:49 am
- 135-degree split-point angles for centering and to reduce pressure on cutting edges
- High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances
- Black oxide finish, for improving lubricity, resisting corrosion, and resistances to chipping or flaking
- Jobber-length, for a wide range of applications
- NAS 907 type D standards, for use in the aerospace industry
Cleveland 2175 Cobalt Steel Jobbers’ Length Drill Bit, Gold Oxide Finish, Round Shank, 135 Degree Notch Point, Letter Size C (Pack of 10)
Amazon.com
Last update was on: November 24, 2024 2:49 am
- 135-degree angle, notched-point provides ease of penetration when starting holes and prevent walking
- High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances
- Screw machine length, for better rigidity and increased strength
- Straw oxide reduces grinding stress within the tool
- Round shanks, for use on a variety of tool-holding systems
Cleveland 3780TC Cobalt Steel Jobbers’ Length Drill Bit, Short Flute, TiCN Coated, Round Shank, 135 Degree Split Point, Letter Size C (Pack of 10)
Amazon.com
Last update was on: November 24, 2024 2:49 am
- 135-degree split-point angles for centering and to reduce pressure on cutting edges
- High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances
- Titanium carbonitride (TiCN) is harder than TiN, which provides excellent heat resistance for more abrasive materials
- Jobber-length, for a wide range of applications
- NAS 907 type D standards, for use in the aerospace industry
Cleveland 2133 Style Cobalt Steel Short Length Drill Bit, Bronze Oxide, Round Shank, 135 Degree Split Point, Letter Size C (Pack of 10)
Amazon.com
Last update was on: November 24, 2024 2:49 am
- Screw machine length, for rigidity and strength
- High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances
- 135-degree split-point angles are self-centering, to reduce walking, good for hard material, and to reduce pressure on cutting edges
- Straw oxide reduces grinding stress within the tool
- Round shanks, for use on a variety of tool-holding systems
