lifeeconomic 
Best results for cnc milling machine cost
Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm
$239.99
$271.19
Amazon.com
Last update was on: November 23, 2024 3:49 am
- New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.
- Integrated: With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
- Software: The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.
【The Best Deal】OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
$18.95
$24.26
Amazon.com
Last update was on: November 23, 2024 3:49 am
- √ Great Value - Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- √ Working Safer - Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up.
- √ Save Time - Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
- √ Easy To Use - Air flow and spray mist volume adjustable design, easier to use.
Waterproof 2.2KW Water Cooled CNC Spindle Motor ER20 24000rpm 220V 8A 400Hz 80x226mm Carved Metal Spindle for CNC Router Milling Engraving Machine Machining
$238.00
$323.68
Amazon.com
Last update was on: November 23, 2024 3:49 am
- High quality Bearings, 4 bearings(C7005x2 + C7003x2),P4 class
- Precision tapered bore 0.01mm
- Runout off: Less than 0.02mm
- This spindle motor is Waterproof ,can be used in Wood, Glass, PVC industry
- Notice:The spindle speed can't lower than 9000rpm!!!!
- The spindle motor is mainly suitable for non-metallic engraving
Milling Machine Lockdown Vise – 360 Degree Swiveling Base – Hardened Metal – CNC Vise – Install Bolt Included. Blue (4in)
$95.99
$134.39
Amazon.com
Last update was on: November 23, 2024 3:49 am
- Premium quality swiveling Milling Vises features perfectly aligned precision gowned jaws
- Acme screws and easy to read 0-360deg scales
- Made from the highest quality ductile Iron 80000 PSI for minimum bending
- HFS (Tm) Brand, Only
- Designed so horizontal force pushed the jaws downward, keeping your piece in the right spot
DRILLPRO 10Pcs 0.8-3 mm Titanium Coat Carbide End Mill Engraving Bits CNC Rotary Burrs Set Tool PCB Mould Plastic Fiber Carbon Fiber Hardwood, 1/8” Shank
$16.99
$22.60
Amazon.com
Last update was on: November 23, 2024 3:49 am
- Use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency.
- High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
- Cutting Edge Diameter: 0.8-3.0 mm( 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 3.17 mm)
- Cutting Edge Length: 12mm. Overall Length: 37mm. Quantity: 1set (10 pcs)
HFS (R) 58pc 5/8" Slot 1/2"-13 Stud Hold Down Clamp Clamping Set Kit Bridgeport Mill
Smarketbuy 6" Lock Down Vise Precision Milling Vice with 6 Inch Jaw Width ACCU Drill Press Vise Milling Drilling Machine Bench Clamp Clamping Vice
$119.99
$175.19
Amazon.com
Last update was on: November 23, 2024 3:49 am
- 6'' ACCU Lock vise
- Jaw Width: 6"
- Jaw Opening: 5.9"
- Jaw Height: 1-3/4"
- Gross Weight: 59.4lbs
- The accuracy of vice(parallelism and squareness) is 0.00098 inch/3.94inch The special segment in the movable jaw forces the vertical pressure
SainSmart Genmitsu CNC Router Machine 3018-MX3, with Mach3 Control and Safety-Driven Design
$349.00
$457.19
Amazon.com
Last update was on: November 23, 2024 3:49 am
- Mach3 Control: SainSmart Genmitsu CNC Router 3018-MX3 is the first 3018 CNC machine that controlled by Mach3. Supported by this professional software, you can control the CNC router like an expert. Mach3 works with other programs and will import DXF files, generate G-Code, fully customizable.
- Safety-Driven Design: MX3 features two 5mm acrylic baffles on each side of the machine so that you can safely monitor the engraving process. To protect against engraving faults, each axis is equipped with a limit/home switch that stops the tool spindle from leaving the engraving area.
ChgImposs Mist Coolant Lubrication Spray System With Check Valve and Stainless Steel Flexible Pipe for Metal Cutting Engraving Cooling Machine/Air Pipe CNC Lathe Milling Drill
$31.96
$40.91
Amazon.com
Last update was on: November 23, 2024 3:49 am
- Save 60-80% lubricants compared with the oldest lubrication tube. Flexible Pipe Length: 1.5m / 4.92ft
- Flexible Pipe Diameter: 4mm / 0.16in
- Stainless steel flexible pipe is more resistant to high temperatures.
- Air flow and spray mist volume adjustable design, easier to use.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure)
