lifeeconomic 
Best results for oil drill bit manufacturers
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron
$14.99
$18.74
Amazon.com
Last update was on: November 24, 2024 6:02 pm
- COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant
- for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
DEWALT DWA1790IR 3-Piece IMPACT READY Step Drill Bit Set
Bosch CO2159 1/2 In. x 6 In. Cobalt Drill Bit
$14.75
$18.73
Amazon.com
Last update was on: November 24, 2024 6:02 pm
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
Thorogood Men’s American Heritage 6" Moc Toe, MAXwear Wedge Non-Safety Toe Boot
WORX WX176L 20V Switchdriver 2-in-1 Cordless Drill and Driver with Rotating Dual Chucks and 2-Speed Motor with Precise Electronic Torque Control
$89.95
$134.03
Amazon.com
Last update was on: November 24, 2024 6:02 pm
- Quickly and conveniently rotate the dual-chuck platform to switch between endless combinations of drill bits and driver bits
- Compact and lightweight
- very easy to control
- 2-speed gearing to tackle all common drilling & driving applications
- Precise electronic torque control prevents the stripping of screws and potential damage to your work environment or materials
- Comes with two 20V MaxLithium batteries, part of the PowerShare 20V battery platform and interchangeable with other WORX tools
Greenlee 655 Kwik Change Stainless Steel Hole Cutter Kit, 5-Piece
$83.01
$107.91
Amazon.com
Last update was on: November 24, 2024 6:02 pm
- Flange stop prevents over-drilling
- Ejector Spring on all sizes above 3/4 inch makes removal of slug easier
- Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking
- Precision carbide teeth for optimum performance and durability
- Includes 3 cutter heads, arbor, hex key and case
Kwikset 98180-002 San Clemente Single Cylinder Low Profile Handleset with Halifax Lever Featuring Smartkey In Satin Nickel
$134.93
$187.55
Amazon.com
Last update was on: November 24, 2024 6:02 pm
- Slim square low-profile deadbolt and matching handleset with a modern interior lever
- Halifax interior lever is reversible, fits both right and left handed doors. Low profile contemporary design has a 50% lower profile than standard deadbolts
- Adjustable throughbolt design slides vertically and horizontally to ensure a straight handleset on your door
- Handleset Deadbolt is ANSI/BHMA Grade 1 certified- the Highest Residential Security Rating
IRWIN HANSON 1/4" – 28 NF Tap and No. 3 Drill Bit Set, 80232
$7.69
$8.77
Amazon.com
Last update was on: November 24, 2024 6:02 pm
- Ideal for creating and threading fasteners holes in metal
- Creates 28 threads per inch
- Drill bit constructed of high speed steel for fast and precise drilling
- Tap crafted of high carbon steel for general purpose drilling
- Includes 1 drill bit and 1 tap
Drilax 3 Pieces Diamond Coated Hollow Core Drill Bit Set 1/4, 1/2, 3/4 Inch Drilling Tile Glass Fish Tank Granite Ceramic Porcelain Bottles Quartz Lot Kitchen Bathroom Shower Lamps
$9.99
$13.89
Amazon.com
Last update was on: November 24, 2024 6:02 pm
- High Quality Diamond Drilling Tool Set of 3 Different Sizes: 1/4" 1/2" 3/4" - Most Used Sizes
- Over 80% cost savings compared to big box stores. Use with standard electric or battery drillers.
- There is no need for a center pilot drill. These tools do not have center pilot drills.
- Do NOT run dry. Diamond Coated Tools will work best if you use water to keep the tools cool.
- Shank sizes vary, maximum shank is 3/8" - suitable for all common electric drillers.
YUFUTOL Carbide Burrs Set 10pcs Double Cut Solid Carbide Rotary Burr Set 1/4 Inch Shank for Die Grinder Drill,Metal Carving, Polishing,Engraving,Drilling
Amazon.com
Last update was on: November 24, 2024 6:02 pm
- ▸ 10pcs Double Cut Solid Carbide Rotary Burr Set, 1/4 inch shank , fits most die rotary grinders
- ▸ Made of heat-treated carbide which can lasts long working life, sharp and durable
- ▸ Wide Range of uses | include Body Shops, Fabrication Shops, Brake Shops, Industrial Shops, Die Manufacturers.
- ▸ Suitable for all skill levels | this is a essential kit for metalworker& enthusiasts who cleans up weldsor works with metal frequently
APEC Top Tier 5-Stage Ultra Safe Reverse Osmosis Drinking Water Filter System (ESSENCE ROES-50)
$189.95
$214.64
Amazon.com
Last update was on: November 24, 2024 6:02 pm
- Supreme quality - designed, engineered, and assembled in USA to guarantee water safety & your health.
- Only technology to remove up to 99% of contaminants including arsenic, chlorine, lead, fluoride, heavy metals, bacteria, virus and 1000+ contaminants. System Capacity- 50 gallons per day @ 60 psi, 30 gallons/day @50 psi and 77 deg F.Tank Capacity-4 gallons. Feed Water pH- 2.0 -11.0. Max Total Dissolved Solids- 2000 ppm
Drill/Tap/Countersink, Hss, 10-24
Jancy Slugger 10208W 1 Gallon Water Soluable Cutting Fluid
$31.55
$45.43
Amazon.com
Last update was on: November 24, 2024 6:02 pm
- Slugger by FEIN/Jancy Cutting Fluid is a water soluble concentrate that makes up to 10 quarts of cutting fluid
- Water based cutting fluid is designed to be used with Slugger cutters to improve life of the cutter
- Slugger by FEIN/Jancy Cutting Fluid can improve surface finish and reduce heat build up when drilling
- Specially designed packaging with a sight window ensures proper mixing ratios
