lifeeconomic 
Best results for pre drill bit size
Bosch Clic-Change 3-Piece Self-Centering Drill Bit Assortment CC2430
$19.80
$22.57
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- EFFICIENT: With Bosch’s Clic-Change bit design, the CC2430 bit set allows for quick bit changes and fast, one-handed load and release
- CONVENIENT: The CC2430 bit set offers quick bit changes without re-chucking or the need for tools
- PRECISION: The bit design features self-centering to reduce bit walking and increase precision when drilling
- COMPATIBILTY: The drill bits have a ¼-inch hex shank and can be used with all of your ¼-inch drills regardless of make or model
Snappy Quick-Change 5-Pc. Countersink Drill Bit Set
FTG USA 3 Pcs Countersink Value Pack same size (#8) 11/64" with Hex Wrench
$16.99
$24.30
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- Top Quality material components highly durable:Tapered drill bit HSS M2, by far the most popular High Speed Steel, for its high toughness, wear resistance, and good cutting edge retention
- 4 cutter #45 Carbon Steel
- #8 countersink featuring a 11/64 inch tapered and fluted drill bit HSS M2
- Drill, countersink and counterbore in 1 step
- the countersink cutter doesn't clog up providing superior speed and clean finish
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6
$11.89
$17.72
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
MOHOO Countersink Drill Bits, 7pcs Woodworking Countersink Drill Bits Set, Woodworking Chamfer High-Speed Steel Countersink Drill Bits for Woodworking 3 4 5 6 7 8 10mm With Hex Key
$9.99
$13.39
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- ①TRI-POINTED DESIGN: The countersink drill bits set with tri-cuspid centering that make sure drills will not produce offset, not easy to slip, no bias, good for accurate and fast drilling. The five-edged chamfer design of the countersink drill helps to remove chips from the holes on both sides automatically and quickly.
- ②HIGH CARBON STEEL MATERIAL: Countersink drill bits are made of high carbon steel which offer high hardness, superior cutting power, good abrasion resistance.
Irwin Industrial Tools 63221 Cobalt Fractional Straight Shank Jobber Length Metal Index Drill Bit Set, 21-Piece
$78.00
$113.88
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- Drill bits are made of M-42 5% cobalt high-speed steel for super abrasive resistance in tough metals
- 135° split point reduces feed pressure for easy penetration without work hardening
- Each drill bit has a heavy-duty spiral flute design that produces faster chip ejection
- Shorter cutting lips reduce torque for drilling in high-tensile-strength materials
- Cobalt drill bit set comes in a metal index case
COMOWARE Titanium Twist Drill Bit Set – 13 Pcs Hex Shank High Speed Steel for Wood Plastic Aluminum Alloy, 1/16"-1/4"
$6.89
$9.16
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.
- Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.
FTG USA 3 Piece #6, 8, 10 Countersink Set with Hex Wrench
$18.99
$24.50
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- Top Quality material components highly durable: Tapered drill bit HSS M2, by far the most popular High Speed Steel, for its high toughness, wear resistance, and good cutting edge retention
- 4 cutter #45 Carbon Steel
- featuring 3 Piece countersink #6 (9/64 inch), #8 (11/64 inch), #10 (3/16 inch)
- Drill, countersink and counterbore in 1 step
- the countersink cutter doesn't clog up providing superior speed and clean finish
COMOWARE Countersink Drill Bits Center Punch Set- 7 Pcs 1/4” Hex Shank HSS 5 Flute Countersink drill bits 90 Degree Center Punch Tool for Wood Quick Change Bit, 1/4”-3/4”.
$13.99
$20.85
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- PREMIUM QUALITY：Made of Industrial grade high carbon steel. Titanium coated, Durable & Long service life.
- PROFESSIONAL DESIGN: 1/4 inch hex shank, fits most power tools. ALL have 90 degree on the point for sharp and precise countersinking.
- EXCELLENT PUNCH:Perfect Helper Center Punch, Marks workpiece with a dimple to prevent screws and drills from wandering.
- WIDELY USED:Great for wood openings, reaming, chamfering, screw head and so on.Suitable for wooden planks, plywood, aluminum board, fiberboard, particle board, plastic, PVC board and other various soft material chamfer.
Migiwata Aluminum Alloy Miniature Hand Tool Set with 1 Three-Jaw Chuck and Hex End Pin Vise and 10 Twist Drill Bits for Delicate Manual Work
$11.56
$13.41
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- PINVISE AND DRILL BIT SET - Includes 1 piece of hand drill and 10 pieces of twist drill bits in 5 different metric bit sizes (2 x 1.0mm, 2 x 1.5mm, 2 x 2.0mm, 2 x 2.5mm, 2 x 3.0mm)
- MATERIAL - Pin vise and chuck are made of aluminum alloy
- Twist drill bits are made of high speed steel 4341
- The knurled handle and hex shaped swivel end is designed for comfort and grip. Swivel end for easy manual drilling.
Norseman CN-TECH Cryogenic Nitrided Super Premium 29 Piece Drill Bit Set – Red Ultradex – 47462-135 Degree Split Point – Round Shank With Three Flats
$136.99
$190.42
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- Superior to Cobalt bits, ultra hard, super premium drill bits that are designed not to snap and shear during hard drilling, even at awkward angles
- Packaged in a convenient, patented high visibility red ultradex that is easy to see and find. Easy to carry around with durable, long lasting, water resistant packaging. A clip is built into the ultradex so that it may be attached to a belt. The round shank has flats ground onto three sides to reduce slippages of the bits when used in a drill chuck.
Knoweasy 5PCS HSS Titanium Step Drill Bit Set with Automatic Center Punch,Multiple Hole 50 Sizes of High Speed Steel Step Drill Bits With Aluminum Case
$22.99
$25.29
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- ✅Clears chips faster and allows particles to escape easily
- ✅With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for metal/wood/plastic countersunk. Suitable for Home DIY, and General Building/Engineering Use.
- ✅Includes five standard step drill bits that can replace 50 individual drill bits, you can process 50 different kinds of diameter holes with the five pieces.
1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$15.05
$17.76
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- JOBBER LENGTH: 1/8-Inch cutting diameter, 1-5/8-Inch flute length, 2-3/4-Inch overall length, 135 degree split point, straight shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 50pcs in 5 Sizes(1, 1.5, 2, 2.5, 3mm) to Cut Through Stainless Steel Cast Iron and Hard Metals
$15.99
$21.59
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- M35 Cobalt Steel - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- No Center Punch Needed - the 135° quick-cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander"
Auger Drill Bit, Staont Non-Slip -3" x 12" Garden Plant Flower Bulb Rapid Planting Drill Bit. Post or Umbrella Hole Digger for 3/8’’Hex Drive Drill
$11.59
$14.72
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- Size Information—Auger size: 3-inch (7.6cm) diameter x 12-inch (30.5cm) length
- Hex drive size: 0.3 inch (0.8 cm), use a 3/8-inch or larger drill
- Steel shaft size: 63/64 inch (2.5cm) steel shaft with non-slip hex drive.
- Various Applications—This spiral hole drill is the professional landscapers choice for dramatically increased efficiency when planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, fertilizer, paint.
7Penn Garden Plant Flower Bulb Auger 2in x 24in Rapid Planter – Post or Umbrella Hole Digger for 3/8in Hex Drive Drill
$32.04
$36.21
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- PLANT MORE IN LESS TIME: The 7Penn Garden Plant Flower Bulb Auger 2” x 24” Inch Rapid Planter – Post or Umbrella Hole Digger for 3/8” Hex Drive Drill takes out all of the guesswork in planting bulbs
- Simply drill as far as the auger will go and lift the auger out of the hole – it is that simple! Drill required, not included
- SAVE YOUR BACK: Has a generous 24-inch (61cm) length that eliminates constantly bending over while drilling
DAMO 1 inch Dry Wet Diamond Core Drill Bit for Concrete Granite Marble Hole Saw
IRWIN Metal Countersink Drill Bit Set, 5 Piece, 1877793
$36.41
$43.33
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- Precision ground 82° tip for countersinking most machinable metals, wood, and plastic
- Made from industrial grade high speed steel for increased durability
- Includes a black oxide finish for added corrosion resistance
- Five-flute design reduces vibration for smoother drilling and extended life
- 1/4" round shank fits all handheld and stationary drills
Neiko 10218A Countersink Drill Bit Set, M2 High Speed Steel, 1/4” Tri-Flat Shank | 1/4”-3/4”, 5 Piece Set with Carrying Case
$21.49
$31.38
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- Set of five 1/4" countersink drill bits with precision-ground 82-degree tips for drilling into wood, soft metals, rubber, plastic, and more
- Made of high quality M2 material construction for extended bit life and 1/4" shank fits common handheld power drill
- Five-flute design reduces vibration for smoother drilling and tri-flat shank allows easy gripping
- Set contains 1/4", 3/8", 1/2", 5/8", and 3/4" countersink drill bits that are very commonly used
HENUO 7 Pcs Center Drill Bit Set,Self Centering Hinge Tapper Core Hole Puncher Woodworking Tools for Cabinet Door 5/64” 7/64” 9/64” 11/64” 13/64” 5mm 1/4”
Amazon.com
Last update was on: November 24, 2024 1:56 pm
- 7 Different Size: Come with most common hinge screw sizes 5/64", 7/64", 9/64", 11/64", 13/64", 5mm, 1/4"
- Utomatical discharge:Sawdust will be automatically discharged from the top of the holes on both sides, without drill blocked. Never miss the center of the hole again, references from the hinge bevels
- High speed steel drill bit and brass body with electroplating
- Adjustable drill depth
- Remove drill for easy replacement
