lifeeconomic 
Best results for 1/8 drill bit long
Hanson 66708 IRWIN 66708 Hanson 1/8" x 6" Aircraft Extension High Speed Steel Straight Shank Drill Bit (66708)
Bosch BL2635 1/8 In. x 6 In. Extra Length Aircraft Black Oxide Drill Bit
$5.19
$6.90
Amazon.com
Last update was on: October 5, 2024 7:31 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
Hymnorq 1/8 Inch Fractional Jobber Twist Drill Bit Set of 10pcs, Heat Resistant M35 Cobalt Steel, Fully Ground and Straight Shank, Suitable for Repeated Drilling in Iron and Stainless Steel
$11.99
$17.75
Amazon.com
Last update was on: October 5, 2024 7:31 am
- HSS-CO MATERIAL - Manufactured from M35 grade cobalt steel, 5% cobalt added to creates a hardened alloy, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- 135° SPLIT POINT - the 135° quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from "walking and wanding". Easy cutting without need of center punch.
Neiko 10047A 12” Extra Long Drill Bit Set, 5 Piece | 1/8", 3/16", 1/4", 5/16", 3/8"
$15.95
$19.78
Amazon.com
Last update was on: October 5, 2024 7:31 am
- High speed steel construction is designed for durability and extended tool life
- Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
- Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
- Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
Drill America 1/8" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
$7.97
$11.08
Amazon.com
Last update was on: October 5, 2024 7:31 am
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 6" overall length for drilling where extra length for reach is required
Grizzly G9750 Aircraft Extension Drill Length 13-Piece Set, 1/16-Inch, 1/4-Inch by 6-Inch Long
Bosch BL2735 1/8 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit
$5.17
$7.55
Amazon.com
Last update was on: October 5, 2024 7:31 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
DEWALT DW1602-1/8-Inch by 12-Inch Extra Long Black Oxide Drill Bit
$6.23
$7.35
Amazon.com
Last update was on: October 5, 2024 7:31 am
- The product is 1/8x12 HS STL Drill Bit
- Easy to use
- The product is manufactured in China
- 135 degree split point drills on contact and prevents walking
- Parabolic flute design improves chip ejection in metal and wood drilling applications
- Black oxide coated for greater wear resistance
Drill America 1/8" x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
$5.03
$6.19
Amazon.com
Last update was on: October 5, 2024 7:31 am
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Vermont American 13158 Black Oxide Fractional Extended Length Aircraft Drill Bit, 1/8-Inch by 6-Inch
$2.59
$3.81
Amazon.com
Last update was on: October 5, 2024 7:31 am
- This item is Vermont American 13158 Black Oxide Fractional Extended Length Aircraft Drill Bit, 1/8-Inch by 6-Inch
- Used for Power Tool Accessories, Drill Bits & Accessories
- The produt is manufactured in China
- Superior durability and speed for most general purpose drilling applications in wood, metal and plastic
- Triple tempered black oxide coating provides very high lubricity to reduce heat buildup and prolong the life of the bit
Bosch BL2739 3/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit
$4.99
$6.54
Amazon.com
Last update was on: October 5, 2024 7:31 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
8pcs 200mm Extra Long High-speed Steel Straight Shank Twist Drill Bits Set Tool 4-10mm For Wood Plastic And Aluminum
$15.29
$20.18
Amazon.com
Last update was on: October 5, 2024 7:31 am
- 【extral long length】Bits are about 200mm(about 7.874 inch）long, provides better stability and balance during quick operation to ensure position is intact.
- 【sharp bits】Bits are sharp(customer comment ) which will make the drilling easier and more effortless.
- 【8 sizes】This extra long twist drill bits set has 8pcs in 4mm, 4.2mm, 4.5mm, 5mm, 5.2mm, 6mm, 8mm, 10mmOD.
- 【high-speed steel】These bits are made of high-speed steel for high hardness and durability,more abrasion resistant and durable than other metal materials.
INTOO Mini Drill Bit Set 60 Pcs+12 Pcs Free High Speed Steel HSS Titanium Micro Drill Bits For Metal,Plastic,Wood 3/64"-1/8" Small drill bit
$11.99
$13.19
Amazon.com
Last update was on: October 5, 2024 7:31 am
- SPECIFICATIONS: 60pcs+12pcs FREE HSS titanium drill set, inch size 3/64",1/16", 5/64", 3/32", 7/64", 1/8", 12 pcs/size
- HSS MATERIAL: Industry grade high speed steel with high hardness, good wear resistance and durability.
- CHARACTERISTICS: 118° precise point with sharpened edge promises cutting speed
- titanium coating increases the ware-resistance and durability of the drill bit, effect long life drilling.
COMOWARE Titanium Twist Drill Bit Set – 60 Pcs High Speed Steel Jobber Drill Bits for Metal, Steel, Wood, Plastic, Copper, Aluminum Alloy, 3/64"-1/8"
$11.88
$14.14
Amazon.com
Last update was on: October 5, 2024 7:31 am
- 【HSS TITANIUM COATING】Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean. It can be used multiple times without deformation.
- 【TWIST DESIGN & PERFORMANCE】PRECISE 135°SPLIT POINT, gold oxide finish and round straight shanks. Prevent walking, clear chips and particles faster. Produced by precision fully ground which ensures chips move smoothly. It is your ideal choice for DIY projects and household maintenance and repair.
