lifeeconomic 
Best results for drill guide for hand drill
Big Gator Tools STD1000DGNP V-Drill Guide
$24.95
$27.69
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- 17 drill sizes, from 1/8" to 3/8", in 1/64" increments
- Use on flat surfaces, round parts, and corners
- Special nickel alloyed steel heat treated for durability
- Non-plated material with light oil coating to prevent rust
- Alignment marks on guide to line up on center
Big Gator Tools SDGMINI MINI V-Drill Guide 21 Drill Sizes
$24.95
$33.43
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- 21 Drill Sizes: #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64".
- Covers all tap drill sizes for tap sizes: 10-32 down to 0-80.
- The portable V-Drill Guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round parts!
- Heat treated for durability. Side alignment marks allow accurate hole locating.
- 100% Made in U.S.A.
DCT SAE Drill Bit Guide Centering Punch 8-pc Center Drilling Set Kit – 3/16” to 1/2” Inch Bushings, Locating Pin, Guide
$15.99
$21.59
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- PRECISE DRILL GUIDE: Use the DCT Standard SAE Drill Bit Guide Set to accurately locate exact drilling centers and guide drill bits perfectly perpendicular to the woodworking piece on flat, round, spherical, and corner edges
- Economical drill press substitute with top quality and precision (not a clamp or vise substitute)
- Additionally use as a quick and accurate dowel drilling guide for edge joining
Dowel Drill Bit Guide Jig,6/7/8/9/10mm Drill Bushings Vertical Hole Woodworking for Electric Power Hand Drill (Blue)
$32.39
$48.26
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- 【Drill Guide Jig for Vertical Hole Drilling】This is a set of drill guide tools for the fixation and centering while drilling and woodworking
- 【Drill Guide Body + 5 Drill Bushings】The drill guide jig has 5 drill bushings and their diameters are 6mm,7mm,8mm,9mm,10mm/0.24,0.28,0.32,0.35,0.39inch respectively.It is rather easy to change the bushing thread into the drill guide jig.
- 【Accurate Drilling】Centerlines ensure accurate alignment when drilling into various surfaces.By holding the drill guide body, easy to get vertical hole drilled without any deviation
Drill Guide Dowel Kit Jig with 6 Bushings 3/16”, 1/4”, 5/16”, 3/8”, 7/16" and 1/2”
6/7/8/9/10mm Woodworking Tool Drill Guide Vertical Drilling Fixture
$28.99
$42.91
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- Main material: Aluminum alloy 6061 ( anodized surface )
- Dimensions:Main body Drill Guide(approx.): 80x54mm/3.14x2.13". Net Weight: about 100g
- Centerlines ensure accurate alignment when drilling into various surfaces
- Function: Centerlines ensure accurate alignment when drilling into various surfaces.
Kanzawa drill guide support K-801
Milescraft 1312 DrillBlock- Handheld Drill Guide
$7.08
$9.63
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- Centerlines ensure accurate alignment when drilling into various surfaces
- Non-slip feet holds the DrillBlock in place while preventing both slipping and marring on wooden work pieces
- The two product v-grooves allow for usage on corners and even cylindrical surfaces too
V-Drill Guide Standard Hole Sizes 1/8-1/2 Inches – 2 Pack
$51.91
$61.77
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- Made in USA, Portable, pocket-sized,Prevents drill bit wander
- Round stock hole alignment marks on one side
- Special nickel alloyed steel heat treated for durability
- Non-plated material with light oil coating to prevent rust
- Centers the holes on pipes, dowels & outside corners
Big Gator Tools MDG1000NP V-Drill Guide
$24.67
$28.12
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- Universal & portable V-Drill guide provides perpendicular alignment of drill bits on flat, round or square materials
- Includes 17 metric drill sizes: 3mm, 3.3mm, 3.5mm, 4mm, 4.2mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 6.8mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm
- Heat-treated nickel alloy steel provides durability & accuracy
- Precision ground base provides perpendicular alignment of drill bit on flat surfaces
Big Gator Tools V-Tap Guide, Standard Sizes 0-80 to 5/8"
Gaosi Tools Woodworking Tool Drill Guide Vertical Drilling Fixture
$31.68
$41.18
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- Material: Aluminum alloy 6061 ( anodized surface )
- Net Weight: about 100g
- Centerlines ensure accurate alignment when drilling into various surfaces
- Packing:1PCS main body Drill Guide(not include drill)
- 6PCS drill bushing(6//7/8/9/10mm )
- Product Size:80mmX54mm
Adjustable Punch Locator Drill Guide Sleeve Cabinet Hardware Jig Template Wood Drilling Dowelling for Installation of Handles, Knobs on Doors and Drawer Pull All Metal
$39.99
$44.79
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- ✅ Adjustable Punch Locator Saving Your Time: No need re-measuring when you drill, the jig cuts the hardware install time by 70%.Reversible fast drilling Even if the back can accurately locate accurate drilling
- ✅ Prime Quality Drill Guide, Made with high-quality stainless steel, aluminum. It can give you enough intensity and a longer lifetime.
- ✅ Convenient Cabinet Hardware Jig, quick-release drill guide block makes set up simple, besides it comes with a storage bag. Dura-Scale, both Imperial and Metric
Hurricane Self-Centering Drill Press Jig
Bosch Clic-Change 3-Piece Self-Centering Drill Bit Assortment CC2430
$19.80
$27.72
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- EFFICIENT: With Bosch’s Clic-Change bit design, the CC2430 bit set allows for quick bit changes and fast, one-handed load and release
- CONVENIENT: The CC2430 bit set offers quick bit changes without re-chucking or the need for tools
- PRECISION: The bit design features self-centering to reduce bit walking and increase precision when drilling
- COMPATIBILTY: The drill bits have a ¼-inch hex shank and can be used with all of your ¼-inch drills regardless of make or model
Zipbolt 40.280 Universal Drill Guide Woodworking Project Kit
$44.99
$54.44
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- The Zipbolt 40.280 Universal Drill Guide is the must have installation accessory when installing Zipbolt products
- Simplifies the process of installing your Zipbolt hardware
- Drill guide has hardened steel inserts for increased durability, holes are lettered for easy reference when drilling
- Drill bits consist of High Speed Steel, 25mm forstner bit tipped with tungsten carbide
- Compatible with Zipbolt 10.820, 11.550, 11.560, 11.600, 11.700, 11.720, 12.500, 12.700, 12.720, 13.500, 13.520, 13.600, 13.610, 13.801, 13.810, 13.900, 13.950, and 13.960
ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit – Drill Bits, Extractor Pins, Drilling Guides, Extractor Nuts Set
$20.99
$24.35
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- EFFORTLESS SCREW & BOLT EXTRACTION: Use the ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit to remove broken fasteners and studs from regular and even recessed bolts, nuts, and screws without breaking or jamming
- Take out any fastener with thread sizes from 3/16-inch to 9/16-inch (5mm to 16mm)
- EASY TO USE: If broken bolt is either above or below the surface, use drill guides
- Extractors have flutes/ridges that will grip broken bolt when driven into newly drilled hole
Big Gator Tools BGRSTIUNC100SNP 6-32-9/16 V-Tap Guide/STI (Standard UNF Size)
$22.95
$32.36
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- Universal & Portable Screw Thread Insert (STI) V-Tap guide provides perpendicular alignment of STI ground thread taps used for Heli Coil inserts on flat, round or square cornered materials
- 9 guide holes cover 10 Unified Course Thread (UNC) ground thread STI tap sizes: 6-32, 8-32, 10-24, 12-24, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12
- Heat treated nickel alloy steel provides durability and accuracy
WEN 4208 8 in. 5-Speed Drill Press
$81.18
$109.59
Amazon.com
Last update was on: November 23, 2024 12:19 pm
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
