lifeeconomic 
Best results for metal countersink drill bit
IRWIN Metal Countersink Drill Bit Set, 5 Piece, 1877793
$36.41
$42.24
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- Precision ground 82° tip for countersinking most machinable metals, wood, and plastic
- Made from industrial grade high speed steel for increased durability
- Includes a black oxide finish for added corrosion resistance
- Five-flute design reduces vibration for smoother drilling and extended life
- 1/4" round shank fits all handheld and stationary drills
Countersink Drill Bit with Center Punch 8 pack
$11.99
$17.75
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- SIZE: 6mm (1/4 inch), 8mm (5/16 inch), 9mm (3/8 inch), 10mm (2/5 inch), 12mm (1/2 inch), 16mm (5/8 inch), 19mm (3/4 inch). 130mm（5 inch）
- HIGH QUALITY: The flute countersink drill bit set is made from standard high speed steel and super hard titanium coated bits. The automatic center punch is made of pure brass.
- GOOD WORKING: Center hole punch creating a starting point that prevents screws and drills from wandering. Countersink drill holes into wood and soft metals countersunk screws and fixings.
Countersink Drill Bit Set 7 Pack 1/4” Hex Shank and 90 Degree HSS 5 Flute Drill for Woodworking Drilling
$9.99
$13.99
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- SIZE: 6mm (1/4 inch), 8mm (5/16 inch), 9mm (3/8 inch), 10mm (2/5 inch), 12mm (1/2 inch), 16mm (5/8 inch), 19mm (3/4 inch).
- HIGH QUALITY: The flute countersink drill bit set is made from standard high speed steel and super hard titanium coated bits.
- GOOD WORKING: Great for sinking 90 degree countersink bit holes into wood and soft metals countersunk screws and fixings.
- GREAT DESIGN: 1/4 inch hex shank drill are fine for a quick change. They don’t slip in drill chucks. Delivers an automatic spring driven strike when pressed against surface.
Neiko 10218A Countersink Drill Bit Set, M2 High Speed Steel, 1/4” Tri-Flat Shank | 1/4”-3/4”, 5 Piece Set with Carrying Case
$21.49
$24.71
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- Set of five 1/4" countersink drill bits with precision-ground 82-degree tips for drilling into wood, soft metals, rubber, plastic, and more
- Made of high quality M2 material construction for extended bit life and 1/4" shank fits common handheld power drill
- Five-flute design reduces vibration for smoother drilling and tri-flat shank allows easy gripping
- Set contains 1/4", 3/8", 1/2", 5/8", and 3/4" countersink drill bits that are very commonly used
3 Flute 90 Degree HSS Chamfering End Mill Cutter Bit Countersink Drill Bit Pack of 6pcs
VonHaus 246-Piece Drill and Drive Bit Set with Titanium Coated HSS Bits and Storage Case for Drilling Metal, Masonry, Wood and Plastics
$39.99
$50.79
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- Comprehensive, high quality 246pc drill bit set – made for masonry, wood, metal and plastic drilling as well as multiple screwdriving and fastening applications
- Full set includes 87 X HSS twist drills, 22 X wood drill bits, 21 X masonry drill bits, 4 X drill stops, 66 X 1” bits, 30 X 2” bits, 6 X nut drivers, 2 X hex keys, 1 X counter sink, 4 X hole saws, 1 X arbor adaptor, 1 X nail punch and 1 X bit holder
IRWIN Tools Black Oxide Countersink Drill Bit, 5-Piece Set (1877791)
$34.79
$41.05
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- Made from industrial grade High-Speed Steel for increased durability. Black oxide finish adds corrosion resistance.
- Five-flute design reduces vibration for smoother drilling and extended bit life.
- Precision-ground 82-degree tip drills countersink holes into most machinable metals, as well as wood and plastic.
- 1/4-inch round shank fits all handheld and stationary drills.
ABN Screw Countersink Kit 5-Piece SAE Drill Bit Set, 82-Degree, 1/4in Shank, 5 Flute – Metal, Wood, Rubber, Plastic
$17.69
$26.36
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- CUT DIFFERENT MATERIALS: Use the ABN Screw Countersink Kit 5-Piece SAE Drill Bit Set, 82-Degree, 1/4” Inch Shank, 5 Flute to quickly and easily cut soft metal, wood, rubber, plastic, and other machinable materials
- Drill a hole and then use one of the included bits to countersink a spot of the screw head
- SIZES: The 5 bits come in SAE standard sizes 1/4-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch
KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 5/16" Shank Diameter, 1/2" Body Diameter
$16.85
$21.23
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET
Naiyong Tools 5 Lathe Mill Center Drill Countersink Bit Tooling Set, Made in M35 HSS 5% Cobalt Contained for Metal, Stainless Steel, Copper, Aluminum and Wood , Titanium Plated （1 mm – 5 mm）
$17.89
$20.04
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- Top Quality M35 HSS . Top Quality Titanium Plated
- Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes
- Sizes 1, 2, 3, 4 and 5, 60° tip angles.
- Quality Guarantee : if there is any issues with our product , please contact with us immediately
GORCHEN Countersink Drill Bit Set Screw Hole Cutter Carpentry Reamer Chamfer Adjustable Depth for Woodworking Plastic Soft Metal 7 PCS
$11.99
$15.95
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- 【Hard and Sharp】made of high speed steel, heat treatment, high hardness, sharp and durable
- 【3 Point Design】 the cutting flutes of the countersink drill bit is made of CNC gear grinding, the three-pointed bit is better in centering
- 【Adjustable Depth】Use the hex wrench to adjust or disassemble the countersink drill bit and the five-flutes chamfering
- 【Chip Removal Quickly】the wide chip slot and the five-flutes chamfering make removing sawdust easier
COMOWARE Countersink Drill Bits Center Punch Set- 7 Pcs 1/4” Hex Shank HSS 5 Flute Countersink drill bits 90 Degree Center Punch Tool for Wood Quick Change Bit, 1/4”-3/4”.
$13.99
$20.43
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- PREMIUM QUALITY：Made of Industrial grade high carbon steel. Titanium coated, Durable & Long service life.
- PROFESSIONAL DESIGN: 1/4 inch hex shank, fits most power tools. ALL have 90 degree on the point for sharp and precise countersinking.
- EXCELLENT PUNCH:Perfect Helper Center Punch, Marks workpiece with a dimple to prevent screws and drills from wandering.
- WIDELY USED:Great for wood openings, reaming, chamfering, screw head and so on.Suitable for wooden planks, plywood, aluminum board, fiberboard, particle board, plastic, PVC board and other various soft material chamfer.
CSLU 5Pcs 82 Degree 5 Flute 6mm Round Shank HSS Chamfer Chamfering End Mill Cutter Bit Countersink Set 1/4 3/8 1/2 5/8 3/4 inch
$15.99
$18.71
Amazon.com
Last update was on: November 22, 2024 3:58 pm
- 5 blade chamfering device 82 degree.
- For aluminum, iron, PV panels and other soft materials.
- High hardness.
- During use, the five blade can better chip removal, the blade is not easily blunt.
- Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
