lifeeconomic 
Best results for metric tap drill size
Huot 12675 Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metric Drill Bit Sizes 2.05 mm to 10.2 mm
$14.92
$17.16
Amazon.com
Last update was on: November 23, 2024 1:00 am
- Index holds 18 taps and drill bits in metric tap sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and drill bit sizes 2.05 mm to 10.2 mm
- Labeled storage holes for identification and organization
- Made of steel with an epoxy finish and has a snap-lock cover for durability and protection
- Meets ISO 529 1975 standards
- Made in USA
KKmoon 7PCS M3 M4 M5 M6 M8 M10 M12 Nitride High Speed Steel HSS6542 Spiral Pointed Tap Machine Hand Screw Thread Taps Set Thread Metric Plug Tap Drill Bits
$11.99
$15.83
Amazon.com
Last update was on: November 23, 2024 1:00 am
- Excellent high speed steel, high hardness with good durability.
- Nitriding coated surface for anti-rust effect.
- Performed well in tapping, quick with high accuracy.
- Spiral pointed design for simultaneous chip removal and tapping.
- Suitable for machine and manual use, great for auto repair and machinery where metric threads are specified.
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6
$11.89
$14.51
Amazon.com
Last update was on: November 23, 2024 1:00 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Greenlee DTAPKITM M3-M10 6-Piece Combination Drill and Tap Set
$34.99
$46.54
Amazon.com
Last update was on: November 23, 2024 1:00 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
IRWIN Tools Hanson Machine Screw/Fractional/Metric Tap and Hex Die and Drill Bit Deluxe Set, 117 Piece 26377
$219.99
$250.79
Amazon.com
Last update was on: November 23, 2024 1:00 am
- Ideal for rethreading fasteners and fastener holes for auto and machinery repair
- Constructed of high carbon steel for durability
- Puts commonly needed taps, dies, drill bits, and extractors at your fingertips
- Perfect set for the professional craftsman
- Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case
Tap and Die Set Metric Hardened Steel Combination Garage Tool Kit with Box -32pcs
$25.99
$37.69
Amazon.com
Last update was on: November 23, 2024 1:00 am
- ◆ QUALITY: the tap die set made from quality hardened steel, it's durable to use
- ◆ CLASSIFIED: you will get 32pcs tools, all of them organinate in a case, it's easy for you to use it.
- ◆ UNIQUE: tap and die set metric ideal for rethreading fasteners and fastener holes for auto and machinery repair, it will play an impartant role in your work.
- ◆ CLEARLLY: all of them are clearly marked with size for you fast finding, is perfect for use on vehicles and machinery to create threads.
6 Pcs 1/4" HSS Spiral Hex Shank Combination Drill Screw Tap Bit Set (M3-M10) with Automatic Spring Loaded Center Punch Tool – Gold
$15.99
$23.67
Amazon.com
Last update was on: November 23, 2024 1:00 am
- Material: HSS (4341) High hardness, rustproof, solid and durable
- Self-centering design: do not need additional center drilling or center punching
- Fast replacement composite cone, uses drill edged principle. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
- Metric: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5.Shank:1/4 inch (6.35mm) hex shank
Nxtop 6Pcs Metric Thread M3-M10 Screw Tapping Tool 1/4" Hex Shank Titanium Plated HSS Combination Drill and Tap Set
$14.39
$19.86
Amazon.com
Last update was on: November 23, 2024 1:00 am
- 1/4 Inch Hex Shank HSS Drill Bit & Screw Tap Set
- High speed steel with Titanium coating,which supports much longer service life
- Metric M3,M4,M5,M6,M8,M10 thread countersink screws can be tapped with this drill and tap set
- M3 x 0.5mm pitch,M4 x 0.7mm pitch,M5 x 0.8mm pitch,M6 x 1.0mm pitch,M8 x 1.25mm pitch,M10 x 1.5mm pitch
- These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated
ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads
$46.99
$63.44
Amazon.com
Last update was on: November 23, 2024 1:00 am
- CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards
- SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75
- UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2
GearWrench 114PC 82812 Ratcheting Tap and Die Drive Tool Set SAE/Metric
Big Gator Tools MTG500NP V-Tap Guide
$22.95
$31.67
Amazon.com
Last update was on: November 23, 2024 1:00 am
- Universal & portable V-Tap guide provides perpendicular alignment of ground thread taps on flat, round & square cornered materials
- 9 guide holes cover 13 metric ground thread tap sizes: 1.6mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm
- Heat-treated nickel alloy steel provides durability & accuracy
- Precision ground base provides perpendicular alignment of tap on flat material
Bosch BDT11S 11Piece Tap & Drill Combo Set
$25.98
$32.99
Amazon.com
Last update was on: November 23, 2024 1:00 am
- Heat-treated carbon steel provides long life and clean, accurate threads
- Rolled threads provide more accuracy than machined threads
- Laser-etched marking ensures size identification won't wear off
- Set Tailored for most general-purpose applications with premium efficiency
Muzerdo 86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case
$129.99
$191.09
Amazon.com
Last update was on: November 23, 2024 1:00 am
- This tap and die set are made of made of high carbon chromium bearing steel which are more stronger, An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel.
- 86 piece tungsten steel set comes in an organized, rugged plastic storage case
- Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman
Hakkin 7 Pcs HSS Nitriding Coated Metric Spiral Flute Taps Set for Metal Wood Plastic Tapping with Good Cutting
$11.79
$16.03
Amazon.com
Last update was on: November 23, 2024 1:00 am
- ★Material: High speed steel 6542, product surface nitrogen treatment, rustproof, solid and durable.High hardness,performed well in tapping,quick with high accuracy.
- ★Set Include:7 Pcs HSS Nitriding Coated Metric Spiral Flute Taps Set( M3 M4 M5 M6 M8 M10 M12).Meeting your different size needs in daily life.
- ★Multifunctional:Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and sticky materials processing.
Century Drill & Tool 97516 10.0×1.25 Metric Tap and 11/32" Drill Combo Pack
$10.98
$16.36
Amazon.com
Last update was on: November 23, 2024 1:00 am
- Tap and drill Combo pack offers correct drill size for the tap in one convenient package
- Tap offers precision cut threads, accurately formed for consistent, exact threading
- Tap is heat treated and tempered for file hard threads, and longer, useful life
- Tap designed for hand cutting applications
- Drill bit made of premium grade high speed steel
Big Gator Tools MDG1000NP V-Drill Guide
$24.67
$31.08
Amazon.com
Last update was on: November 23, 2024 1:00 am
- Universal & portable V-Drill guide provides perpendicular alignment of drill bits on flat, round or square materials
- Includes 17 metric drill sizes: 3mm, 3.3mm, 3.5mm, 4mm, 4.2mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 6.8mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm
- Heat-treated nickel alloy steel provides durability & accuracy
- Precision ground base provides perpendicular alignment of drill bit on flat surfaces
Best Choice 40-Piece Tap and Die Set – SAE Inch Sizes | Essential Threading Tool with Storage Case
$26.99
$30.50
Amazon.com
Last update was on: November 23, 2024 1:00 am
- PREMIUM MATERIAL AND DURABILITY: Industrial grade GCr15 bearing steel construction ensures durability and tool longevity
- EXCELLENT CUTTING PERFORMANCE: All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance
- TAPERED TEETH DESIGN: Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading
ABN Large Tap and Die Set Metric Tap and Die Kit Rethreading Tool Kit Thread Maker Hole Threader 110-Piece Set, Metric
$106.83
$130.33
Amazon.com
Last update was on: November 23, 2024 1:00 am
- CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards
- Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material
- Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading
