lifeeconomic 
Best results for grinding stainless steel dremel
YXGOOD 10 Pieces Tungsten Carbide Double Cut Rotary Burr Set with 3 mm (1/8 Inch) Shank and 6 mm (1/4 Inch) Head Size
Dremel EZ406-02 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit
Dremel 9904 Tungsten Carbide Cutter
$7.64
$10.01
Amazon.com
Last update was on: October 31, 2024 2:16 am
- Use on Hardened steel, fired ceramics and other hard materials
- 1/8" Maximum cutting head
- 1/8" Shank
- Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking
- For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit
- Secure objects to a stable surface while working
10pcs 1/8" Double Cut Tungsten Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool for Grinder Drill, DIY Wood-working Carving, Metal Polishing, Engraving, Drilling
$12.23
$14.31
Amazon.com
Last update was on: October 31, 2024 2:16 am
- LONG WORKING LIFE: Lasts long working life, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.
- CARBIDE DIE GRINDER BITS Material: Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).
- HIGH PRODUCTIVITY: Processing efficiency than the manual file to improve of times, than with a small handle wheel to improve nearly ten times.
YUFUTOL SA-5 Tungsten Carbide Burr Cylinder Shape Double Cut Rotary Burr File(1/2” cutter Dia X 1”Cutter Length) with 1/4” Shank dia,Pack of 1
$13.69
$15.47
Amazon.com
Last update was on: October 31, 2024 2:16 am
- 【Shape】 Double Cut cylinder shape SA-5, Size: 45mmShank length, 1/4”shank diameter, 1/2" cutter diameter, 1" length ofcut
- 【Durable】 Made of heat-treated tungsten carbide YG8that lasts 10 times working life than HSS , suitable for machining variouskinds of metal material including ≤HRC65 hardened steel.
- 【Versatile】 Widely used for metalwork, tool making, engineering,model engineering, wood carving, jewellery making, welding, chamferring,casting, deburring, grinding, cylinder head porting and sculpting.
Double Cut Titanium Carbide Rotary Burr Set – Rocaris 10 Pieces 1/8"(3mm) Shank and 1/4"(6 mm) Head SizeTungsten Steel, for Woodworking, Drilling, Metal Craving, Engraving, Polishing
$17.99
$24.65
Amazon.com
Last update was on: October 31, 2024 2:16 am
- 【Carbide Die Grinder Bits】Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).carbide rotary burr set with 1 4-inch shank.
- 【Double Cut Design】The groove lines of the head are crossed, more suitable for an object whose density is relatively low, such as wooden, plastic and aluminum.
- 【Long Service Life】The service life of tungsten steel rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.
45PC Wire Brushes for Drill Set Stainless Steel Wheel Brushes Dremel Accessories for Rotary Tools – Grinding, Sanding, Polishing
$15.99
$23.35
Amazon.com
Last update was on: October 31, 2024 2:16 am
- Cleaning: Remove Burrs, Rust, Dust And Oxide Layer In Products Surface And Hard-to-reach Corner. Especially For Item Made From Brass, Copper, Stainless Steel,gold, Bronze,silver.
- Coating: Improving The Quality Of Products By Stripping Residue, Deburring Grinding,polishing.
- Applications: Be Used In The Micro-electronic Equipment,jewelry And Impression Production. It`s A Great Accessories For Locksmiths, Gunsmith, Jewelers, Technicians, Coin Collectors, Archeologist, Students
Carbide Burr Set JESTUOUS 1/8 Shank Diameter Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool 20pcs
$17.99
$26.45
Amazon.com
Last update was on: October 31, 2024 2:16 am
- Used with handheld electric or pneumatic tool drive,for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs.
- With tungsten carbide material ,sharp and sturdy,processing all kinds of metal and non-metal.
- For cast iron, cast steel, carbon steel, alloy steel, stainless steel,plastics,metal and other materials.
- Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder.
eBoTrade 10 Pieces Tungsten Carbide Rotary Burr SET 1/8" Shank/double Cut Carbide Rotary Burr Set with 3mm Shank/tungsten Carbide Single Cut Rotary Burr SET 1/8" Shank Fit Dremel
$14.99
$19.94
Amazon.com
Last update was on: October 31, 2024 2:16 am
- ✔ Tungsten Carbide Double Cut Rotary Burr SET 1/8" shank Fit Dremel
- ✔ Shank diameter: 3mm, Shank Length: 35mm, Cutting edge diameter: 6 mm
- ✔ Material: Tungsten | Carbide Use: Rotary Burr, High micro hardness,high abrasion resistance,good toughness
- ✔ High performance on processing Copper, Aluminum, Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc.
- ✔ Highly recommended for polishing metals and plastics, jewelers, lapidary use, hobbies, crafts, craft modeling, home repair and so much more.
HOYIN 6Piece Wire Wheel Cup Brush Set|0.0118In Coarse Crimped Carbon Steel|1/4In Round Shank|for Drill
$8.99
$11.87
Amazon.com
Last update was on: October 31, 2024 2:16 am
- Removing weld scale spatters,extra-heavy rust and corrosion, paint and dirt and glitch from metal and other surface.
- Use for surface roughening,for adhesion and finsish preparation perior to plating or painting,stripping paint from surfaces like wood.
- For use on steel and finish preparation.
- 0.0118 in. carbon steel crimped wire for longer life.
- For operation at speeds up to 4,500RPM,1/4 in. shank suitable for drill.
25 Pack 3" x 1/16" x 3/8" Arbor Metal & Stainless Steel Cut Off Wheels – for Die Grinders
Carbide Burr Set JESTUOUS 1/4 Inch Shank Diameter Double Cut Edge Rotary File Polishing Carving tool for Die Grinder Drill Bits,8pcs
$39.99
$52.39
Amazon.com
Last update was on: October 31, 2024 2:16 am
- The carbide burr set tool fits most small rotary tools,die grinders,for woodworking drilling carving engraving milling porting.
- Made of heat-treated tungsten carbide material,sintered and machined from 100% new raw tungsten carbide.
- Unique tooth angle prevents chipping for the longest lasting design possible.
- Used for metal working in mold and pattern making, die sinking, surface cleaning and maintenance,perfect for opening holes, or porting heads on ferrous materials.
ZFE 217 Piece Rotary Tool Accessory Set – Fits Dremel – Easy Cutting, Grinding, Sanding, Sharpening, Carving and Polishing (217 Piece Rotary Tool Accessory Set)
$17.99
$22.13
Amazon.com
Last update was on: October 31, 2024 2:16 am
- ▲217PCS ASSORTED ACCESSORIES - Includes rich rotary tool accessories of cutting, grinding, sanding, sharpening, polishing, engraving, drilling, cleanin, meet your various DIY application requirements
- ▲WIDE USAGE - 1/8"diameter shanks, compatible with most rotary tools
- Ideal for for home improvement, hobby, craft and whenever you need to polish, grind, drill, cut, engrave, and more
- ▲ADDED STAINLESS SAW BLADES - Comes with stainless steel saw blades And 22mm Diamond Blade that others don’t have, so you can cut plastic easily
