lifeeconomic 
Best results for .062 drill bit
Hollow Punch Set for Drills and Drill Presses, Pack of 6
Oregon 60-079 PTO Control Cable
Tool kit DIY Precision Pin Mini Hand Rotary Tools Drill Set with Twist Drill Bits Set of 10 By NALEDI
$17.99
$22.49
Amazon.com
Last update was on: November 22, 2024 1:02 pm
- Works great for precision drilling and tapping, electronic assembling, tool-making, hole punching, jewelry engraving, models and mininatures and hobbies
- Compatible and useful: the pin vise can hold small drills, deburrers, wires, reamers
- Pin vice is useful for electronic assembling, tool-making, model making
- It feels good in the hand and has a 3-jaw hardened steel keyless chuck, so you don't have to bother with swapping out collets
Aluminum Pop Rivets 1/8" x 1/16" Dome Head Blind 4-1 Gap .020" – .062" Quantity 100 by Fastenere
$8.98
$12.84
Amazon.com
Last update was on: November 22, 2024 1:02 pm
- Dome head is the most commonly specified rivet head style because of its low profile and clean finished appearance. It is slightly rounded and twice as wide as the rivet body diameter.
- Made of Aluminum Alloy 5050, 5052, or equivalent. Aluminum alloys have excellent corrosion resistance.
- The aluminum mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. Aluminum/Aluminum rivets have the lowest tensile and shear values of all break mandrel rivets.
Pop Rivets 1/8" x 1/16" All Steel Dome Head Blind 4-1 Gap .020" – .062" Quantity 100 by Fastenere
$9.99
$12.69
Amazon.com
Last update was on: November 22, 2024 1:02 pm
- Dome head is the most commonly specified rivet head style because of its low profile and clean finished appearance. It is slightly rounded and twice as wide as the rivet body diameter.
- Made of low carbon steel and should be used when fastening materials of similar mechanical and physical properties.
- The steel mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. The steel mandrel gives this style of rivet greater tensile and shear values than aluminum rivets with aluminum mandrels.
Hammond 1591STCL Translucent Polycarbonate Project Box — Inches (4.3" x 1.6" x 3.3") mm (110mm x 40mm x 85mm)
$11.36
$16.59
Amazon.com
Last update was on: November 22, 2024 1:02 pm
- IP54 rated translucent enclosure protects against dust and splashing water while making parts, sensors or indicators visible
- UL flammability rating of 94V-0 polycarbonate for safety
- M3 x 10 mm Phillips machine screws, threaded into integral brass bushings secures the lid for long lasting use
- Integral card guides accept 1.5 mm (0.062") P.C. cards for convenience
Safe-T-Proof STP-CL-600-WH-2208 Cabinet Door Touch Latches (Pack of 8), White
Amana Tool – BU-150 High Precision Saw Blade Bore Reduction Bushing 3/4 To 5/8
Pop Rivets 1/8" x 1/16" Aluminum Body Steel Mandrel Dome Head Blind 4-1 Gap .020" – .062" Quantity 100 by Fastenere
$12.46
$17.19
Amazon.com
Last update was on: November 22, 2024 1:02 pm
- Open end blind rivets are tubular rivets with a mandrel through the center. The entire rivet assembly is inserted into a hole drilled through the parts to be joined, and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and snaps off the mandrel.
- Dome head is the most commonly specified rivet head style because of its low profile and clean finished appearance. It is slightly rounded and twice as wide as the rivet body diameter.
Stainless Steel Pop Rivets 1/8" x 1/16" Dome Head Blind 4-1 Gap .020" – .062" Quantity 100 by Fastenere
$12.44
$14.80
Amazon.com
Last update was on: November 22, 2024 1:02 pm
- Dome head is the most commonly specified rivet head style because of its low profile and clean finished appearance. It is slightly rounded and twice as wide as the rivet body diameter.
- Made of grade 305 stainless steel which provides excellent corrosion resistance. Stainless steel rivets should be used when fastening materials of similar mechanical and physical properties.
- The stainless steel mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. Stainless steel rivets offer the Highest tensile, shear, and break load strengths of all rivet materials.
MCIGICM FR-4 Copper Clad PCB Laminate Circuit Board, Single Side, 4 x 2.7 inch (10Pcs)
$7.59
$8.42
Amazon.com
Last update was on: November 22, 2024 1:02 pm
- This Copper Clad Plated Printed Board is desgined For Etch Etching Project.Single Sided (SS) Blank Copper on the Front, FR4 Bakelite on the Back.10 pcs a Pack.
- With Small Size 7x10 cm - 2.7" x 4" (W*L), 1.6mm - 0.062" Thickness, Weight in 15g 0.5oz Each.10 pieces epoxy Brown 4 x 2.7 inch
- Packed with Moisture Protecting Bag to Prevent Copper Rust. 10pcs Bare Boards Kits Delivered in their Best Conditon.
